<li>Function <code>freq()</code> has moved to a new package, <ahref="https://github.com/msberends/clean"><code>clean</code></a> (<ahref="https://cran.r-project.org/package=clean">CRAN link</a>). Creating frequency tables is actually not the scope of this package (never was) and this function has matured a lot over the last two years. Therefore, a new package was created for data cleaning and checking and it perfectly fits the <code>freq()</code> function. The <ahref="https://github.com/msberends/clean"><code>clean</code></a> package is available on CRAN and will be installed automatically when updating the <code>AMR</code> package, that now imports it. In a later stage, the <code><ahref="../reference/skewness.html">skewness()</a></code> and <code><ahref="../reference/kurtosis.html">kurtosis()</a></code> functions will be moved to the <code>clean</code> package too.</li>
<p>Additional way to calculate co-resistance, i.e.when using multiple antibiotics as input for <code>portion_*</code> functions or <code>count_*</code> functions. This can be used to determine the empiric susceptibily of a combination therapy. A new parameter <code>only_all_tested</code> (<strong>which defaults to <code>FALSE</code></strong>) replaces the old <code>also_single_tested</code> and can be used to select one of the two methods to count isolates and calculate portions. The difference can be seen in this example table (which is also on the <code>portion</code> and <code>count</code> help pages), where the %SI is being determined:</p>
<p>Since this is a major change, usage of the old <code>also_single_tested</code> will throw an informative error that it has been replaced by <code>only_all_tested</code>.</p>
<li>Added more informative errors and warnings to <code><ahref="../reference/eucast_rules.html">eucast_rules()</a></code>
</li>
<li>
<p>Added tibble printing support for classes <code>rsi</code>, <code>mic</code>, <code>ab</code> and <code>mo</code>. When using tibbles containing antibiotic columns, values <code>S</code> will print in green, values <code>I</code> will print in yellow and values <code>R</code> will print in red:</p>
<divclass="sourceCode"id="cb2"><preclass="sourceCode r"><codeclass="sourceCode r"><aclass="sourceLine"id="cb2-1"data-line-number="1">(run this on your own console, as this page does not support colour printing)</a>
<li>Removed class <code>atc</code> - using <code><ahref="../reference/AMR-deprecated.html">as.atc()</a></code> is now deprecated in favour of <code><ahref="../reference/ab_property.html">ab_atc()</a></code> and this will return a character, not the <code>atc</code> class anymore</li>
<li>Fix for using <code>mo_*</code> functions where the coercion uncertainties and failures would not be available through <code><ahref="../reference/as.mo.html">mo_uncertainties()</a></code> and <code><ahref="../reference/as.mo.html">mo_failures()</a></code> anymore</li>
<li>Deprecated the <code>country</code> parameter of <code><ahref="../reference/mdro.html">mdro()</a></code> in favour of the already existing <code>guideline</code> parameter to support multiple guidelines within one country</li>
<li>Using verbose mode with <code><ahref="../reference/eucast_rules.html">eucast_rules(..., verbose = TRUE)</a></code> returns more informative and readable output</li>
<li>Speed improvement for <code><ahref="../reference/guess_ab_col.html">guess_ab_col()</a></code> which is now 30 times faster for antibiotic abbreviations</li>
<li><p>Using factors as input for <code><ahref="../reference/eucast_rules.html">eucast_rules()</a></code> now adds missing factors levels when the function changes antibiotic results</p></li>
<p>Function <code><ahref="../reference/portion.html">rsi_df()</a></code> to transform a <code>data.frame</code> to a data set containing only the microbial interpretation (S, I, R), the antibiotic, the percentage of S/I/R and the number of available isolates. This is a convenient combination of the existing functions <code><ahref="../reference/count.html">count_df()</a></code> and <code><ahref="../reference/portion.html">portion_df()</a></code> to immediately show resistance percentages and number of available isolates:</p>
<li>Function <code><ahref="../reference/mo_property.html">mo_info()</a></code> as an analogy to <code><ahref="../reference/ab_property.html">ab_info()</a></code>. The <code><ahref="../reference/mo_property.html">mo_info()</a></code> prints a list with the full taxonomy, authors, and the URL to the online database of a microorganism</li>
<li><p>Function <code><ahref="../reference/mo_property.html">mo_synonyms()</a></code> to get all previously accepted taxonomic names of a microorganism</p></li>
<li>Column names of output <code><ahref="../reference/count.html">count_df()</a></code> and <code><ahref="../reference/portion.html">portion_df()</a></code> are now lowercase</li>
<li>Algorithm improvements for <code><ahref="../reference/as.ab.html">as.ab()</a></code> and <code><ahref="../reference/as.mo.html">as.mo()</a></code> to understand even more severely misspelled input</li>
<li>Added <code>ggplot2</code> methods for automatically determining the scale type of classes <code>mo</code> and <code>ab</code>
</li>
<li>Added names of object in the header in frequency tables, even when using pipes</li>
<li>Prevented <code>"bacteria"</code> from getting coerced by <code><ahref="../reference/as.ab.html">as.ab()</a></code> because Bacterial is a brand name of trimethoprim (TMP)</li>
<li>Fixed a bug where setting an antibiotic would not work for <code><ahref="../reference/eucast_rules.html">eucast_rules()</a></code> and <code><ahref="../reference/mdro.html">mdro()</a></code>
</li>
<li>Fixed a EUCAST rule for Staphylococci, where amikacin resistance would not be inferred from tobramycin</li>
<li>Removed <code>latest_annual_release</code> from the <code><ahref="../reference/catalogue_of_life_version.html">catalogue_of_life_version()</a></code> function</li>
<li>Removed antibiotic code <code>PVM1</code> from the <code>antibiotics</code> data set as this was a duplicate of <code>PME</code>
<li>Fixed bug where not all old taxonomic names would be printed, when using a vector as input for <code><ahref="../reference/as.mo.html">as.mo()</a></code>
<li>Small improvements to <code><ahref="https://www.rdocumentation.org/packages/graphics/topics/plot">plot()</a></code> and <code><ahref="https://www.rdocumentation.org/packages/graphics/topics/barplot">barplot()</a></code> for MIC and RSI classes</li>
<li>Support for translation of disk diffusion and MIC values to RSI values (i.e.antimicrobial interpretations). Supported guidelines are EUCAST (2011 to 2019) and CLSI (2011 to 2019). Use <code><ahref="../reference/as.rsi.html">as.rsi()</a></code> on an MIC value (created with <code><ahref="../reference/as.mic.html">as.mic()</a></code>), a disk diffusion value (created with the new <code><ahref="../reference/as.disk.html">as.disk()</a></code>) or on a complete date set containing columns with MIC or disk diffusion values.</li>
<li>Function <code><ahref="../reference/mo_property.html">mo_name()</a></code> as alias of <code><ahref="../reference/mo_property.html">mo_fullname()</a></code>
<li>Added guidelines of the WHO to determine multi-drug resistance (MDR) for TB (<code><ahref="../reference/mdro.html">mdr_tb()</a></code>) and added a new vignette about MDR. Read this tutorial <ahref="https://msberends.gitlab.io/AMR/articles/MDR.html">here on our website</a>.</li>
<li>Fixed a critical bug in <code><ahref="../reference/first_isolate.html">first_isolate()</a></code> where missing species would lead to incorrect FALSEs. This bug was not present in AMR v0.5.0, but was in v0.6.0 and v0.6.1.</li>
<li>Fixedd a bug in <code><ahref="../reference/eucast_rules.html">eucast_rules()</a></code> where antibiotics from WHONET software would not be recognised</li>
<li>Column <code>ab</code> contains a human readable EARS-Net code, used by ECDC and WHO/WHONET - this is the primary identifier used in this package</li>
<li>Column <code>atc</code> contains the ATC code, used by WHO/WHOCC</li>
<li>Column <code>cid</code> contains the CID code (Compound ID), used by PubChem</li>
<p>All output will be translated by using an included translation file which <ahref="https://gitlab.com/msberends/AMR/blob/master/data-raw/translations.tsv">can be viewed here</a>.</p>
Please <ahref="https://gitlab.com/msberends/AMR/issues/new?issue%5Btitle%5D=Translation%20suggestion">create an issue in one of our repositories</a> if you want additions in this file.</li>
<li>Improvements to plotting AMR results with <code><ahref="../reference/ggplot_rsi.html">ggplot_rsi()</a></code>:
<ul>
<li>New parameter <code>colours</code> to set the bar colours</li>
<li>New parameters <code>title</code>, <code>subtitle</code>, <code>caption</code>, <code>x.title</code> and <code>y.title</code> to set titles and axis descriptions</li>
<li>Added ~5,000 more old taxonomic names to the <code>microorganisms.old</code> data set, which leads to better results finding when using the <code><ahref="../reference/as.mo.html">as.mo()</a></code> function</li>
<li>This package now honours the new EUCAST insight (2019) that S and I are but classified as susceptible, where I is defined as ‘increased exposure’ and not ‘intermediate’ anymore. For functions like <code><ahref="../reference/portion.html">portion_df()</a></code> and <code><ahref="../reference/count.html">count_df()</a></code> this means that their new parameter <code>combine_SI</code> is TRUE at default. Our plotting function <code><ahref="../reference/ggplot_rsi.html">ggplot_rsi()</a></code> also reflects this change since it uses <code><ahref="../reference/count.html">count_df()</a></code> internally.</li>
<p>Removed all hardcoded EUCAST rules and replaced them with a new reference file which <ahref="https://gitlab.com/msberends/AMR/blob/master/data-raw/eucast_rules.tsv">can be viewed here</a>.</p>
Please <ahref="https://gitlab.com/msberends/AMR/issues/new?issue%5Btitle%5D=EUCAST%20edit">create an issue in one of our repositories</a> if you want changes in this file.</li>
<li>Changed default settings for <code><ahref="../reference/age_groups.html">age_groups()</a></code>, to let groups of fives and tens end with 100+ instead of 120+</li>
<li>Function <code><ahref="../reference/as.mo.html">as.mo()</a></code> now gently interprets any number of whitespace characters (like tabs) as one space</li>
<li>Function <code><ahref="../reference/as.mo.html">as.mo()</a></code> now returns <code>UNKNOWN</code> for <code>"con"</code> (WHONET ID of ‘contamination’) and returns <code>NA</code> for <code>"xxx"</code>(WHONET ID of ‘no growth’)</li>
<li>Support for R 3.6.0 and later by providing support for <ahref="https://developer.r-project.org/Blog/public/2019/02/14/staged-install/index.html">staged install</a>
<p>We’ve got a new website: <ahref="https://msberends.gitlab.io/AMR/">https://msberends.gitlab.io/AMR</a> (built with the great <ahref="https://pkgdown.r-lib.org/"><code>pkgdown</code></a>)</p>
<ul>
<li>Contains the complete manual of this package and all of its functions with an explanation of their parameters</li>
<li>Contains a comprehensive tutorial about how to conduct antimicrobial resistance analysis, import data from WHONET or SPSS and many more.</li>
<strong>BREAKING</strong>: removed deprecated functions, parameters and references to ‘bactid’. Use <code><ahref="../reference/as.mo.html">as.mo()</a></code> to identify an MO code.</li>
<li>Catalogue of Life as a new taxonomic source for data about microorganisms, which also contains all ITIS data we used previously. The <code>microorganisms</code> data set now contains:
<li>All ~3,000 (sub)species from these orders of the kingdom of Fungi: Eurotiales, Onygenales, Pneumocystales, Saccharomycetales and Schizosaccharomycetales (covering at least like all species of <em>Aspergillus</em>, <em>Candida</em>, <em>Pneumocystis</em>, <em>Saccharomyces</em> and <em>Trichophyton</em>)</li>
<li>All ~2,000 (sub)species from ~100 other relevant genera, from the kingdoms of Animalia and Plantae (like <em>Strongyloides</em> and <em>Taenia</em>)</li>
This data is updated annually - check the included version with the new function <code><ahref="../reference/catalogue_of_life_version.html">catalogue_of_life_version()</a></code>.</li>
<li>Due to this change, some <code>mo</code> codes changed (e.g. <em>Streptococcus</em> changed from <code>B_STRPTC</code> to <code>B_STRPT</code>). A translation table is used internally to support older microorganism IDs, so users will not notice this difference.</li>
<li>Support for data from <ahref="https://whonet.org/">WHONET</a> and <ahref="https://ecdc.europa.eu/en/about-us/partnerships-and-networks/disease-and-laboratory-networks/ears-net">EARS-Net</a> (European Antimicrobial Resistance Surveillance Network):
<li>Exported files from WHONET can be read and used in this package. For functions like <code><ahref="../reference/first_isolate.html">first_isolate()</a></code> and <code><ahref="../reference/eucast_rules.html">eucast_rules()</a></code>, all parameters will be filled in automatically.</li>
<li>This package now knows all antibiotic abbrevations by EARS-Net (which are also being used by WHONET) - the <code>antibiotics</code> data set now contains a column <code>ears_net</code>.</li>
<li>The function <code><ahref="../reference/as.mo.html">as.mo()</a></code> now knows all WHONET species abbreviations too, because almost 2,000 microbial abbreviations were added to the <code>microorganisms.codes</code> data set.</li>
<p>The <code>antibiotics</code> data set will be searched, after which the input data will be checked for column names with a value in any abbreviations, codes or official names found in the <code>antibiotics</code> data set. For example:</p>
<aclass="sourceLine"id="cb7-4"data-line-number="4"><spanclass="co"># Filtering on glycopeptide antibacterials: all of `vanc` and `teic` is R</span></a></code></pre></div>
These functions use <code><ahref="../reference/AMR-deprecated.html">as.atc()</a></code> internally. The old <code>atc_property</code> has been renamed <code><ahref="../reference/atc_online.html">atc_online_property()</a></code>. This is done for two reasons: firstly, not all ATC codes are of antibiotics (ab) but can also be of antivirals or antifungals. Secondly, the input must have class <code>atc</code> or must be coerable to this class. Properties of these classes should start with the same class name, analogous to <code><ahref="../reference/as.mo.html">as.mo()</a></code> and e.g. <code>mo_genus</code>.</li>
<li>New functions <code><ahref="../reference/mo_source.html">set_mo_source()</a></code> and <code><ahref="../reference/mo_source.html">get_mo_source()</a></code> to use your own predefined MO codes as input for <code><ahref="../reference/as.mo.html">as.mo()</a></code> and consequently all <code>mo_*</code> functions</li>
<li>New function <code><ahref="../reference/as.mo.html">mo_failures()</a></code> to review values that could not be coerced to a valid MO code, using <code><ahref="../reference/as.mo.html">as.mo()</a></code>. This latter function will now only show a maximum of 10 uncoerced values and will refer to <code><ahref="../reference/as.mo.html">mo_failures()</a></code>.</li>
<li>New function <code><ahref="../reference/as.mo.html">mo_uncertainties()</a></code> to review values that could be coerced to a valid MO code using <code><ahref="../reference/as.mo.html">as.mo()</a></code>, but with uncertainty.</li>
<li>New function <code><ahref="../reference/as.mo.html">mo_renamed()</a></code> to get a list of all returned values from <code><ahref="../reference/as.mo.html">as.mo()</a></code> that have had taxonomic renaming</li>
<li>New function <code><ahref="../reference/age.html">age()</a></code> to calculate the (patients) age in years</li>
<li>New function <code><ahref="../reference/age_groups.html">age_groups()</a></code> to split ages into custom or predefined groups (like children or elderly). This allows for easier demographic antimicrobial resistance analysis per age group.</li>
<p>New function <code><ahref="../reference/resistance_predict.html">ggplot_rsi_predict()</a></code> as well as the base R <code><ahref="https://www.rdocumentation.org/packages/graphics/topics/plot">plot()</a></code> function can now be used for resistance prediction calculated with <code><ahref="../reference/resistance_predict.html">resistance_predict()</a></code>:</p>
<p>Functions <code><ahref="../reference/first_isolate.html">filter_first_isolate()</a></code> and <code><ahref="../reference/first_isolate.html">filter_first_weighted_isolate()</a></code> to shorten and fasten filtering on data sets with antimicrobial results, e.g.:</p>
<li>New function <code><ahref="../reference/availability.html">availability()</a></code> to check the number of available (non-empty) results in a <code>data.frame</code>
</li>
<li><p>New vignettes about how to conduct AMR analysis, predict antimicrobial resistance, use the <em>G</em>-test and more. These are also available (and even easier readable) on our website: <ahref="https://msberends.gitlab.io/AMR"class="uri">https://msberends.gitlab.io/AMR</a>.</p></li>
<li>Updated EUCAST Clinical breakpoints to <ahref="http://www.eucast.org/clinical_breakpoints/">version 9.0 of 1 January 2019</a>, the data set <code>septic_patients</code> now reflects these changes</li>
<li>Fixed a critical bug where some rules that depend on previous applied rules would not be applied adequately</li>
<li>Emphasised in manual that penicillin is meant as benzylpenicillin (ATC <ahref="https://www.whocc.no/atc_ddd_index/?code=J01CE01">J01CE01</a>)</li>
<li>New info is returned when running this function, stating exactly what has been changed or added. Use <code><ahref="../reference/eucast_rules.html">eucast_rules(..., verbose = TRUE)</a></code> to get a data set with all changed per bug and drug combination.</li>
<li>Removed data sets <code>microorganisms.oldDT</code>, <code>microorganisms.prevDT</code>, <code>microorganisms.unprevDT</code> and <code>microorganismsDT</code> since they were no longer needed and only contained info already available in the <code>microorganisms</code> data set</li>
<li>Added 65 antibiotics to the <code>antibiotics</code> data set, from the <ahref="http://ec.europa.eu/health/documents/community-register/html/atc.htm">Pharmaceuticals Community Register</a> of the European Commission</li>
<li>Removed columns <code>atc_group1_nl</code> and <code>atc_group2_nl</code> from the <code>antibiotics</code> data set</li>
<li>Functions <code>atc_ddd()</code> and <code>atc_groups()</code> have been renamed <code><ahref="../reference/atc_online.html">atc_online_ddd()</a></code> and <code><ahref="../reference/atc_online.html">atc_online_groups()</a></code>. The old functions are deprecated and will be removed in a future version.</li>
<li>Function <code>guess_mo()</code> is now deprecated in favour of <code><ahref="../reference/as.mo.html">as.mo()</a></code> and will be removed in future versions</li>
<li>Function <code>guess_atc()</code> is now deprecated in favour of <code><ahref="../reference/AMR-deprecated.html">as.atc()</a></code> and will be removed in future versions</li>
<p>Uncertainty of the algorithm is now divided into four levels, 0 to 3, where the default <code>allow_uncertain = TRUE</code> is equal to uncertainty level 2. Run <code><ahref="../reference/as.mo.html">?as.mo</a></code> for more info about these levels.</p>
<li>All microbial IDs that found are now saved to a local file <code>~/.Rhistory_mo</code>. Use the new function <code>clean_mo_history()</code> to delete this file, which resets the algorithms.</li>
<p>Incoercible results will now be considered ‘unknown’, MO code <code>UNKNOWN</code>. On foreign systems, properties of these will be translated to all languages already previously supported: German, Dutch, French, Italian, Spanish and Portuguese:</p>
<aclass="sourceLine"id="cb14-3"data-line-number="3"><spanclass="co"># one unique value (^= 100.0%) could not be coerced and is considered 'unknown': "qwerty". Use mo_failures() to review it.</span></a>
<li>Fixed a bug where distances between dates would not be calculated right - in the <code>septic_patients</code> data set this yielded a difference of 0.15% more isolates</li>
<li>Will now use a column named like “key(…)ab” or “key(…)antibiotics” for the key antibiotics (parameter <code>col_keyantibiotics()</code>), when this parameter was left blank</li>
<li>A note to the manual pages of the <code>portion</code> functions, that low counts can influence the outcome and that the <code>portion</code> functions may camouflage this, since they only return the portion (albeit being dependent on the <code>minimum</code> parameter)</li>
<li>Reduce false positives for <code><ahref="../reference/as.rsi.html">is.rsi.eligible()</a></code> using the new <code>threshold</code> parameter</li>
<li>Summaries of class <code>mo</code> will now return the top 3 and the unique count, e.g.using <code><ahref="https://www.rdocumentation.org/packages/base/topics/summary">summary(mo)</a></code>
</li>
<li>Small text updates to summaries of class <code>rsi</code> and <code>mic</code>
<divclass="sourceCode"id="cb15"><preclass="sourceCode r"><codeclass="sourceCode r"><aclass="sourceLine"id="cb15-1"data-line-number="1"><spanclass="co"># Determine genus of microorganisms (mo) in `septic_patients` data set:</span></a>
<aclass="sourceLine"id="cb15-2"data-line-number="2"><spanclass="co"># OLD WAY</span></a>
<li>Added header info for class <code>mo</code> to show unique count of families, genera and species</li>
<li>Now honours the <code>decimal.mark</code> setting, which just like <code>format</code> defaults to <code><ahref="https://www.rdocumentation.org/packages/base/topics/options">getOption("OutDec")</a></code>
</li>
<li>The new <code>big.mark</code> parameter will at default be <code>","</code> when <code>decimal.mark = "."</code> and <code>"."</code> otherwise</li>
<li>Fix for header text where all observations are <code>NA</code>
</li>
<li>New parameter <code>droplevels</code> to exclude empty factor levels when input is a factor</li>
<li>Function <code><ahref="../reference/ggplot_rsi.html">scale_y_percent()</a></code> now contains the <code>limits</code> parameter</li>
<li>Automatic parameter filling for <code><ahref="../reference/mdro.html">mdro()</a></code>, <code><ahref="../reference/key_antibiotics.html">key_antibiotics()</a></code> and <code><ahref="../reference/eucast_rules.html">eucast_rules()</a></code>
<li>Repository moved to GitLab: <ahref="https://gitlab.com/msberends/AMR"class="uri">https://gitlab.com/msberends/AMR</a>
</li>
<li>Function <code>count_all</code> to get all available isolates (that like all <code>portion_*</code> and <code>count_*</code> functions also supports <code>summarise</code> and <code>group_by</code>), the old <code>n_rsi</code> is now an alias of <code>count_all</code>
</li>
<li>Function <code>get_locale</code> to determine language for language-dependent output for some <code>mo_*</code> functions. This is now the default value for their <code>language</code> parameter, by which the system language will be used at default.</li>
<li>Data sets <code>microorganismsDT</code>, <code>microorganisms.prevDT</code>, <code>microorganisms.unprevDT</code> and <code>microorganisms.oldDT</code> to improve the speed of <code>as.mo</code>. They are for reference only, since they are primarily for internal use of <code>as.mo</code>.</li>
<li>Function <code>read.4D</code> to read from the 4D database of the MMB department of the UMCG</li>
<li>Functions <code>mo_authors</code> and <code>mo_year</code> to get specific values about the scientific reference of a taxonomic entry</li>
<li>Functions <code>MDRO</code>, <code>BRMO</code>, <code>MRGN</code> and <code>EUCAST_exceptional_phenotypes</code> were renamed to <code>mdro</code>, <code>brmo</code>, <code>mrgn</code> and <code>eucast_exceptional_phenotypes</code>
</li>
<li>
<code>EUCAST_rules</code> was renamed to <code>eucast_rules</code>, the old function still exists as a deprecated function</li>
<li>Now also applies rules from the EUCAST ‘Breakpoint tables for bacteria’, version 8.1, 2018, <ahref="http://www.eucast.org/clinical_breakpoints/"class="uri">http://www.eucast.org/clinical_breakpoints/</a> (see Source of the function)</li>
<li>New parameter <code>rules</code> to specify which rules should be applied (expert rules, breakpoints, others or all)</li>
<li>New parameter <code>verbose</code> which can be set to <code>TRUE</code> to get very specific messages about which columns and rows were affected</li>
<li>Better error handling when rules cannot be applied (i.e.new values could not be inserted)</li>
<li>The number of affected values will now only be measured once per row/column combination</li>
<li>Data set <code>septic_patients</code> now reflects these changes</li>
<li>Added parameter <code>pipe</code> for piperacillin (J01CA12), also to the <code>mdro</code> function</li>
<li>Small fixes to EUCAST clinical breakpoint rules</li>
<li>Added column <code>kingdom</code> to the microorganisms data set, and function <code>mo_kingdom</code> to look up values</li>
<li>Tremendous speed improvement for <code>as.mo</code> (and subsequently all <code>mo_*</code> functions), as empty values wil be ignored <em>a priori</em>
</li>
<li>Fewer than 3 characters as input for <code>as.mo</code> will return NA</li>
<li>Added parameter <code>combine_IR</code> (TRUE/FALSE) to functions <code>portion_df</code> and <code>count_df</code>, to indicate that all values of I and R must be merged into one, so the output only consists of S vs.IR (susceptible vs.non-susceptible)</li>
<li>Fix for <code>portion_*(..., as_percent = TRUE)</code> when minimal number of isolates would not be met</li>
<li>Added parameter <code>also_single_tested</code> for <code>portion_*</code> and <code>count_*</code> functions to also include cases where not all antibiotics were tested but at least one of the tested antibiotics includes the target antimicribial interpretation, see <code><ahref="../reference/portion.html">?portion</a></code>
<li>Using <code>portion_*</code> functions now throws a warning when total available isolate is below parameter <code>minimum</code>
</li>
<li>Functions <code>as.mo</code>, <code>as.rsi</code>, <code>as.mic</code>, <code>as.atc</code> and <code>freq</code> will not set package name as attribute anymore</li>
<aclass="sourceLine"id="cb18-3"data-line-number="3"><spanclass="st"></span><spanclass="kw">select</span>(<spanclass="op">-</span>count, <spanclass="op">-</span>cum_count) <spanclass="co"># only get item, percent, cum_percent</span></a></code></pre></div>
<code>first_isolate</code> now tries to find columns to use as input when parameters are left blank</li>
<li>Improvements for MDRO algorithm (function <code>mdro</code>)</li>
<li>Data set <code>septic_patients</code> is now a <code>data.frame</code>, not a tibble anymore</li>
<li>Removed diacritics from all authors (columns <code>microorganisms$ref</code> and <code>microorganisms.old$ref</code>) to comply with CRAN policy to only allow ASCII characters</li>
<li>Fix for <code>mo_property</code> not working properly</li>
<li>Fix for <code>eucast_rules</code> where some Streptococci would become ceftazidime R in EUCAST rule 4.5</li>
<li>Speed improvement for <code>is.rsi.eligible</code>, now 15-20 times faster</li>
<li>In <code>g.test</code>, when <code><ahref="https://www.rdocumentation.org/packages/base/topics/sum">sum(x)</a></code> is below 1000 or any of the expected values is below 5, Fisher’s Exact Test will be suggested</li>
<li>
<code>ab_name</code> will try to fall back on <code>as.atc</code> when no results are found</li>
<li>Removed the addin to view data sets</li>
<li><p>Percentages will now will rounded more logically (e.g.in <code>freq</code> function)</p></li>
<li>New dependency on package <code>crayon</code>, to support formatted text in the console</li>
<li>Dependency <code>tidyr</code> is now mandatory (went to <code>Import</code> field) since <code>portion_df</code> and <code>count_df</code> rely on it</li>
<li>The data set <code>microorganisms</code> now contains <strong>all microbial taxonomic data from ITIS</strong> (kingdoms Bacteria, Fungi and Protozoa), the Integrated Taxonomy Information System, available via <ahref="https://itis.gov"class="uri">https://itis.gov</a>. The data set now contains more than 18,000 microorganisms with all known bacteria, fungi and protozoa according ITIS with genus, species, subspecies, family, order, class, phylum and subkingdom. The new data set <code>microorganisms.old</code> contains all previously known taxonomic names from those kingdoms.</li>
<li>Functions <code>count_R</code>, <code>count_IR</code>, <code>count_I</code>, <code>count_SI</code> and <code>count_S</code> to selectively count resistant or susceptible isolates
<li>Extra function <code>count_df</code> (which works like <code>portion_df</code>) to get all counts of S, I and R of a data set with antibiotic columns, with support for grouped variables</li>
<li>Function <code>is.rsi.eligible</code> to check for columns that have valid antimicrobial results, but do not have the <code>rsi</code> class yet. Transform the columns of your raw data with: <code>data %>% mutate_if(is.rsi.eligible, as.rsi)</code>
<p>Functions <code>as.mo</code> and <code>is.mo</code> as replacements for <code>as.bactid</code> and <code>is.bactid</code> (since the <code>microoganisms</code> data set not only contains bacteria). These last two functions are deprecated and will be removed in a future release. The <code>as.mo</code> function determines microbial IDs using intelligent rules:</p>
<aclass="sourceLine"id="cb21-5"data-line-number="5"><spanclass="kw"><ahref="../reference/as.mo.html">as.mo</a></span>(<spanclass="st">"S group A"</span>)</a>
<li>Added parameter <code>reference_df</code> for <code>as.mo</code>, so users can supply their own microbial IDs, name or codes as a reference table</li>
<li>Function <code>labels_rsi_count</code> to print datalabels on a RSI <code>ggplot2</code> model</li>
<li><p>Functions <code>as.atc</code> and <code>is.atc</code> to transform/look up antibiotic ATC codes as defined by the WHO. The existing function <code>guess_atc</code> is now an alias of <code>as.atc</code>.</p></li>
<li>Function <code>ab_property</code> and its aliases: <code>ab_name</code>, <code>ab_tradenames</code>, <code>ab_certe</code>, <code>ab_umcg</code> and <code>ab_trivial_nl</code>
</li>
<li>Introduction to AMR as a vignette</li>
<li>Removed clipboard functions as it violated the CRAN policy</li>
<li><p>Renamed <code>septic_patients$sex</code> to <code>septic_patients$gender</code></p></li>
<li>Added three antimicrobial agents to the <code>antibiotics</code> data set: Terbinafine (D01BA02), Rifaximin (A07AA11) and Isoconazole (D01AC05)</li>
<p>Support for quasiquotation in the functions series <code>count_*</code> and <code>portions_*</code>, and <code>n_rsi</code>. This allows to check for more than 2 vectors or columns.</p>
<li>Edited <code>ggplot_rsi</code> and <code>geom_rsi</code> so they can cope with <code>count_df</code>. The new <code>fun</code> parameter has value <code>portion_df</code> at default, but can be set to <code>count_df</code>.</li>
<li>Fix for <code>ggplot_rsi</code> when the <code>ggplot2</code> package was not loaded</li>
<li>Added datalabels function <code>labels_rsi_count</code> to <code>ggplot_rsi</code>
</li>
<li>Added possibility to set any parameter to <code>geom_rsi</code> (and <code>ggplot_rsi</code>) so you can set your own preferences</li>
<li>Fix for joins, where predefined suffices would not be honoured</li>
<li>Added parameter <code>quote</code> to the <code>freq</code> function</li>
<li>Added generic function <code>diff</code> for frequency tables</li>
<li>Added longest en shortest character length in the frequency table (<code>freq</code>) header of class <code>character</code>
</li>
<li>
<p>Support for types (classes) list and matrix for <code>freq</code></p>
<strong>BREAKING</strong>: <code>rsi_df</code> was removed in favour of new functions <code>portion_R</code>, <code>portion_IR</code>, <code>portion_I</code>, <code>portion_SI</code> and <code>portion_S</code> to selectively calculate resistance or susceptibility. These functions are 20 to 30 times faster than the old <code>rsi</code> function. The old function still works, but is deprecated.
<li>New function <code>portion_df</code> to get all portions of S, I and R of a data set with antibiotic columns, with support for grouped variables</li>
<strong>BREAKING</strong>: the methodology for determining first weighted isolates was changed. The antibiotics that are compared between isolates (call <em>key antibiotics</em>) to include more first isolates (afterwards called first <em>weighted</em> isolates) are now as follows:
<li>New functions <code>as.bactid</code> and <code>is.bactid</code> to transform/ look up microbial ID’s.</li>
<li>The existing function <code>guess_bactid</code> is now an alias of <code>as.bactid</code>
</li>
<li>New Becker classification for <em>Staphylococcus</em> to categorise them into Coagulase Negative <em>Staphylococci</em> (CoNS) and Coagulase Positve <em>Staphylococci</em> (CoPS)</li>
<li>New Lancefield classification for <em>Streptococcus</em> to categorise them into Lancefield groups</li>
<li>For convience, new descriptive statistical functions <code>kurtosis</code> and <code>skewness</code> that are lacking in base R - they are generic functions and have support for vectors, data.frames and matrices</li>
<li>Function <code>g.test</code> to perform the Χ<sup>2</sup> distributed <ahref="https://en.wikipedia.org/wiki/G-test"><em>G</em>-test</a>, which use is the same as <code>chisq.test</code>
<li>Support for Addins menu in RStudio to quickly insert <code>%in%</code> or <code>%like%</code> (and give them keyboard shortcuts), or to view the datasets that come with this package</li>
<li>Function <code>p.symbol</code> to transform p values to their related symbols: <code>0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1</code>
</li>
<li>Functions <code>clipboard_import</code> and <code>clipboard_export</code> as helper functions to quickly copy and paste from/to software like Excel and SPSS. These functions use the <code>clipr</code> package, but are a little altered to also support headless Linux servers (so you can use it in RStudio Server)</li>
<li>Support for existing functions <code>hist</code> and <code>plot</code> to use a frequency table as input: <code><ahref="https://www.rdocumentation.org/packages/graphics/topics/hist">hist(freq(df$age))</a></code>
</li>
<li>Support for <code>as.vector</code>, <code>as.data.frame</code>, <code>as_tibble</code> and <code>format</code>
<li>Function <code>top_freq</code> function to return the top/below <em>n</em> items as vector</li>
<li>Header of frequency tables now also show Mean Absolute Deviaton (MAD) and Interquartile Range (IQR)</li>
<li>Possibility to globally set the default for the amount of items to print, with <code><ahref="https://www.rdocumentation.org/packages/base/topics/options">options(max.print.freq = n)</a></code> where <em>n</em> is your preset value</li>
<li>Improvements for forecasting with <code>resistance_predict</code> and added more examples</li>
<li>More antibiotics added as parameters for EUCAST rules</li>
<li>Updated version of the <code>septic_patients</code> data set to better reflect the reality</li>
<li>Pretty printing for tibbles removed as it is not really the scope of this package</li>
<li>Printing of <code>mic</code> and <code>rsi</code> classes now returns all values - use <code>freq</code> to check distributions</li>
<li>Improved speed of key antibiotics comparison for determining first isolates</li>
<li>Column names for the <code>key_antibiotics</code> function are now generic: 6 for broadspectrum ABs, 6 for Gram-positive specific and 6 for Gram-negative specific ABs</li>
<li>Speed improvement for the <code>abname</code> function</li>
<li>
<code>%like%</code> now supports multiple patterns</li>
<li>Frequency tables are now actual <code>data.frame</code>s with altered console printing to make it look like a frequency table. Because of this, the parameter <code>toConsole</code> is not longer needed.</li>
<li>Fix for <code>freq</code> where the class of an item would be lost</li>
<li>Small translational improvements to the <code>septic_patients</code> dataset and the column <code>bactid</code> now has the new class <code>"bactid"</code>
</li>
<li>Small improvements to the <code>microorganisms</code> dataset (especially for <em>Salmonella</em>) and the column <code>bactid</code> now has the new class <code>"bactid"</code>
<li>Now possible to coerce MIC values with a space between operator and value, i.e. <code><ahref="../reference/as.mic.html">as.mic("<= 0.002")</a></code> now works</li>
<li>Added <code>"groups"</code> option for <code>atc_property(..., property)</code>. It will return a vector of the ATC hierarchy as defined by the <ahref="https://www.whocc.no/atc/structure_and_principles/">WHO</a>. The new function <code>atc_groups</code> is a convenient wrapper around this.</li>
<li>Build-in host check for <code>atc_property</code> as it requires the host set by <code>url</code> to be responsive</li>
<li>Improved <code>first_isolate</code> algorithm to exclude isolates where bacteria ID or genus is unavailable</li>
<li>Fix for warning <em>hybrid evaluation forced for row_number</em> (<ahref="https://github.com/tidyverse/dplyr/commit/924b62"><code>924b62</code></a>) from the <code>dplyr</code> package v0.7.5 and above</li>
<li>Function <code>n_rsi</code> to count cases where antibiotic test results were available, to be used in conjunction with <code><ahref="https://dplyr.tidyverse.org/reference/summarise.html">dplyr::summarise</a></code>, see ?rsi</li>
<li>Function <code>guess_bactid</code> to <strong>determine the ID</strong> of a microorganism based on genus/species or known abbreviations like MRSA</li>
<li>Function <code>guess_atc</code> to <strong>determine the ATC</strong> of an antibiotic based on name, trade name, or known abbreviations</li>
<li>Function <code>freq</code> to create <strong>frequency tables</strong>, with additional info in a header</li>
<ahref="http://www.eucast.org/expert_rules_and_intrinsic_resistance">Exceptional resistances defined by EUCAST</a> are also supported instead of countries alone</li>
<li>Functions <code>BRMO</code> and <code>MRGN</code> are wrappers for Dutch and German guidelines, respectively</li>
<li>New algorithm to determine weighted isolates, can now be <code>"points"</code> or <code>"keyantibiotics"</code>, see <code><ahref="../reference/first_isolate.html">?first_isolate</a></code>
<li>Expanded <code>README.md</code> with more examples</li>
<li>Added <ahref="https://orcid.org">ORCID</a> of authors to DESCRIPTION file</li>
<li>Added unit testing with the <code>testthat</code> package</li>
<li>Added build tests for Linux and macOS using Travis CI (<ahref="https://travis-ci.org/msberends/AMR"class="uri">https://travis-ci.org/msberends/AMR</a>)</li>
<li>Added line coverage checking using CodeCov (<ahref="https://codecov.io/gh/msberends/AMR/tree/master/R"class="uri">https://codecov.io/gh/msberends/AMR/tree/master/R</a>)</li>
<p>Developed by <ahref='https://www.rug.nl/staff/m.s.berends/'>Matthijs S. Berends</a>, <ahref='https://www.rug.nl/staff/c.f.luz/'>Christian F. Luz</a>, <ahref='https://www.rug.nl/staff/c.glasner/'>Corinna Glasner</a>, <ahref='https://www.rug.nl/staff/a.w.friedrich/'>Alex W. Friedrich</a>, <ahref='https://www.rug.nl/staff/b.sinha/'>Bhanu N. M. Sinha</a>.</p>
</div>
<divclass="pkgdown">
<p>Site built with <ahref="https://pkgdown.r-lib.org/">pkgdown</a> 1.3.0.</p>
