These functions can be used to calculate the (co-)resistance or susceptibility of microbial isolates (i.e. percentage of S, SI, I, IR or R). All functions support quasiquotation with pipes, can be used in summarise()
from the dplyr
package and also support grouped variables, see Examples.
resistance()
should be used to calculate resistance, susceptibility()
should be used to calculate susceptibility.
Usage
resistance(..., minimum = 30, as_percent = FALSE, only_all_tested = FALSE)
susceptibility(..., minimum = 30, as_percent = FALSE, only_all_tested = FALSE)
proportion_R(..., minimum = 30, as_percent = FALSE, only_all_tested = FALSE)
proportion_IR(..., minimum = 30, as_percent = FALSE, only_all_tested = FALSE)
proportion_I(..., minimum = 30, as_percent = FALSE, only_all_tested = FALSE)
proportion_SI(..., minimum = 30, as_percent = FALSE, only_all_tested = FALSE)
proportion_S(..., minimum = 30, as_percent = FALSE, only_all_tested = FALSE)
proportion_df(
data,
translate_ab = "name",
language = get_AMR_locale(),
minimum = 30,
as_percent = FALSE,
combine_SI = TRUE,
combine_IR = FALSE
)
rsi_df(
data,
translate_ab = "name",
language = get_AMR_locale(),
minimum = 30,
as_percent = FALSE,
combine_SI = TRUE,
combine_IR = FALSE
)
Source
M39 Analysis and Presentation of Cumulative Antimicrobial Susceptibility Test Data, 4th Edition, 2014, Clinical and Laboratory Standards Institute (CLSI). https://clsi.org/standards/products/microbiology/documents/m39/.
Arguments
- ...
one or more vectors (or columns) with antibiotic interpretations. They will be transformed internally with
as.rsi()
if needed. Use multiple columns to calculate (the lack of) co-resistance: the probability where one of two drugs have a resistant or susceptible result. See Examples.- minimum
the minimum allowed number of available (tested) isolates. Any isolate count lower than
minimum
will returnNA
with a warning. The default number of30
isolates is advised by the Clinical and Laboratory Standards Institute (CLSI) as best practice, see Source.- as_percent
a logical to indicate whether the output must be returned as a hundred fold with % sign (a character). A value of
0.123456
will then be returned as"12.3%"
.- only_all_tested
(for combination therapies, i.e. using more than one variable for
...
): a logical to indicate that isolates must be tested for all antibiotics, see section Combination Therapy below- data
a data.frame containing columns with class
rsi
(seeas.rsi()
)- translate_ab
a column name of the antibiotics data set to translate the antibiotic abbreviations to, using
ab_property()
- language
language of the returned text, defaults to system language (see
get_AMR_locale()
) and can also be set withgetOption("AMR_locale")
. Uselanguage = NULL
orlanguage = ""
to prevent translation.- combine_SI
a logical to indicate whether all values of S and I must be merged into one, so the output only consists of S+I vs. R (susceptible vs. resistant). This used to be the argument
combine_IR
, but this now follows the redefinition by EUCAST about the interpretation of I (increased exposure) in 2019, see section 'Interpretation of S, I and R' below. Default isTRUE
.- combine_IR
a logical to indicate whether all values of I and R must be merged into one, so the output only consists of S vs. I+R (susceptible vs. non-susceptible). This is outdated, see argument
combine_SI
.
Details
The function resistance()
is equal to the function proportion_R()
. The function susceptibility()
is equal to the function proportion_SI()
.
Remember that you should filter your data to let it contain only first isolates! This is needed to exclude duplicates and to reduce selection bias. Use first_isolate()
to determine them in your data set.
These functions are not meant to count isolates, but to calculate the proportion of resistance/susceptibility. Use the count()
functions to count isolates. The function susceptibility()
is essentially equal to count_susceptible() / count_all()
. Low counts can influence the outcome - the proportion
functions may camouflage this, since they only return the proportion (albeit being dependent on the minimum
argument).
The function proportion_df()
takes any variable from data
that has an rsi
class (created with as.rsi()
) and calculates the proportions R, I and S. It also supports grouped variables. The function rsi_df()
works exactly like proportion_df()
, but adds the number of isolates.
Combination Therapy
When using more than one variable for ...
(= combination therapy), use only_all_tested
to only count isolates that are tested for all antibiotics/variables that you test them for. See this example for two antibiotics, Drug A and Drug B, about how susceptibility()
works to calculate the %SI:
--------------------------------------------------------------------
= FALSE only_all_tested = TRUE
only_all_tested ----------------------- -----------------------
Drug A Drug B include as include as include as include as
numerator denominator numerator denominator-------- -------- ---------- ----------- ---------- -----------
S or I S or I X X X X
R S or I X X X X<NA> S or I X X - -
S or I R X X X X- X - X
R R <NA> R - - - -
<NA> X X - -
S or I <NA> - - - -
R <NA> <NA> - - - -
--------------------------------------------------------------------
Please note that, in combination therapies, for only_all_tested = TRUE
applies that:
count_S() + count_I() + count_R() = count_all()
proportion_S() + proportion_I() + proportion_R() = 1
and that, in combination therapies, for only_all_tested = FALSE
applies that:
count_S() + count_I() + count_R() >= count_all()
proportion_S() + proportion_I() + proportion_R() >= 1
Using only_all_tested
has no impact when only using one antibiotic as input.
Interpretation of R and S/I
In 2019, the European Committee on Antimicrobial Susceptibility Testing (EUCAST) has decided to change the definitions of susceptibility testing categories R and S/I as shown below (https://www.eucast.org/newsiandr/).
R = Resistant
A microorganism is categorised as Resistant when there is a high likelihood of therapeutic failure even when there is increased exposure. Exposure is a function of how the mode of administration, dose, dosing interval, infusion time, as well as distribution and excretion of the antimicrobial agent will influence the infecting organism at the site of infection.S = Susceptible
A microorganism is categorised as Susceptible, standard dosing regimen, when there is a high likelihood of therapeutic success using a standard dosing regimen of the agent.I = Susceptible, Increased exposure
A microorganism is categorised as Susceptible, Increased exposure when there is a high likelihood of therapeutic success because exposure to the agent is increased by adjusting the dosing regimen or by its concentration at the site of infection.
This AMR package honours this (new) insight. Use susceptibility()
(equal to proportion_SI()
) to determine antimicrobial susceptibility and count_susceptible()
(equal to count_SI()
) to count susceptible isolates.
See also
count()
to count resistant and susceptible isolates.
Examples
# example_isolates is a data set available in the AMR package.
# run ?example_isolates for more info.
# base R ------------------------------------------------------------
resistance(example_isolates$AMX) # determines %R
#> [1] 0.5955556
susceptibility(example_isolates$AMX) # determines %S+I
#> [1] 0.4044444
# be more specific
proportion_S(example_isolates$AMX)
#> [1] 0.4022222
proportion_SI(example_isolates$AMX)
#> [1] 0.4044444
proportion_I(example_isolates$AMX)
#> [1] 0.002222222
proportion_IR(example_isolates$AMX)
#> [1] 0.5977778
proportion_R(example_isolates$AMX)
#> [1] 0.5955556
# dplyr -------------------------------------------------------------
# \donttest{
if (require("dplyr")) {
example_isolates %>%
group_by(hospital_id) %>%
summarise(r = resistance(CIP),
n = n_rsi(CIP)) # n_rsi works like n_distinct in dplyr, see ?n_rsi
example_isolates %>%
group_by(hospital_id) %>%
summarise(R = resistance(CIP, as_percent = TRUE),
SI = susceptibility(CIP, as_percent = TRUE),
n1 = count_all(CIP), # the actual total; sum of all three
n2 = n_rsi(CIP), # same - analogous to n_distinct
total = n()) # NOT the number of tested isolates!
# Calculate co-resistance between amoxicillin/clav acid and gentamicin,
# so we can see that combination therapy does a lot more than mono therapy:
example_isolates %>% susceptibility(AMC) # %SI = 76.3%
example_isolates %>% count_all(AMC) # n = 1879
example_isolates %>% susceptibility(GEN) # %SI = 75.4%
example_isolates %>% count_all(GEN) # n = 1855
example_isolates %>% susceptibility(AMC, GEN) # %SI = 94.1%
example_isolates %>% count_all(AMC, GEN) # n = 1939
# See Details on how `only_all_tested` works. Example:
example_isolates %>%
summarise(numerator = count_susceptible(AMC, GEN),
denominator = count_all(AMC, GEN),
proportion = susceptibility(AMC, GEN))
example_isolates %>%
summarise(numerator = count_susceptible(AMC, GEN, only_all_tested = TRUE),
denominator = count_all(AMC, GEN, only_all_tested = TRUE),
proportion = susceptibility(AMC, GEN, only_all_tested = TRUE))
example_isolates %>%
group_by(hospital_id) %>%
summarise(cipro_p = susceptibility(CIP, as_percent = TRUE),
cipro_n = count_all(CIP),
genta_p = susceptibility(GEN, as_percent = TRUE),
genta_n = count_all(GEN),
combination_p = susceptibility(CIP, GEN, as_percent = TRUE),
combination_n = count_all(CIP, GEN))
# Get proportions S/I/R immediately of all rsi columns
example_isolates %>%
select(AMX, CIP) %>%
proportion_df(translate = FALSE)
# It also supports grouping variables
# (use rsi_df to also include the count)
example_isolates %>%
select(hospital_id, AMX, CIP) %>%
group_by(hospital_id) %>%
rsi_df(translate = FALSE)
}
#> hospital_id antibiotic interpretation value isolates
#> 1 A AMX SI 0.3932584 70
#> 2 A AMX R 0.6067416 108
#> 3 A CIP SI 0.8743961 181
#> 4 A CIP R 0.1256039 26
#> 5 B AMX SI 0.3854875 170
#> 6 B AMX R 0.6145125 271
#> 7 B CIP SI 0.8296593 414
#> 8 B CIP R 0.1703407 85
#> 9 C AMX SI 0.3714286 65
#> 10 C AMX R 0.6285714 110
#> 11 C CIP SI 0.7970297 161
#> 12 C CIP R 0.2029703 41
#> 13 D AMX SI 0.4334532 241
#> 14 D AMX R 0.5665468 315
#> 15 D CIP SI 0.8483034 425
#> 16 D CIP R 0.1516966 76
# }