WHO Collaborating Centre for Drug Statistics Methodology
*(
This package contains the complete taxonomic tree of almost all microorganisms from the authoritative and comprehensive Catalogue of Life ([www.catalogueoflife.org](http://www.catalogueoflife.org)).
Included are:
* All ~55,000 (sub)species from the kingdoms of Archaea, Bacteria and Protozoa
* All ~3,500 (sub)species from these orders of the kingdom of Fungi: Eurotiales, Onygenales, Pneumocystales, Saccharomycetales, Schizosaccharomycetales and Tremellales.
The kingdom of Fungi is a very large taxon with almost 300,000 different (sub)species, of which most are not microbial (but rather macroscopic, like mushrooms). Because of this, not all fungi fit the scope of this package and including everything would tremendously slow down our algorithms too. By only including the aforementioned taxonomic orders, the most relevant fungi are covered (like all species of *Aspergillus*, *Candida*, *Cryptococcus*, *Histoplasma*, *Pneumocystis*, *Saccharomyces* and *Trichophyton*).
* All ~2,000 (sub)species from ~100 other relevant genera, from the kingdoms of Animalia and Plantae (like *Strongyloides* and *Taenia*)
* All ~21,000 previously accepted names of included (sub)species that have been taxonomically renamed
* The responsible author(s) and year of scientific publication
This data is updated annually - check the included version with `catalogue_of_life_version()`.
**About the Catalogue of Life**
The [Catalogue of Life](http://www.catalogueoflife.org) is the most comprehensive and authoritative global index of species currently available. It holds essential information on the names, relationships and distributions of over 1.6 million species. The Catalogue of Life is used to support the major biodiversity and conservation information services such as the Global Biodiversity Information Facility (GBIF), Encyclopedia of Life (EoL) and the International Union for Conservation of Nature Red List. It is recognised by the Convention on Biological Diversity as a significant component of the Global Taxonomy Initiative and a contribution to Target 1 of the Global Strategy for Plant Conservation.
Read more about the data from the Catalogue of Life [in our manual](./reference/catalogue_of_life.html).
#### Antimicrobial reference data
WHO Collaborating Centre for Drug Statistics Methodology
We support WHONET and EARS-Net data. Exported files from WHONET can be imported into R and can be analysed easily using this package. For education purposes, we created an [example data set `WHONET`](./reference/WHONET.html) with the exact same structure as a WHONET export file. Furthermore, this package also contains a [data set `antibiotics`](./reference/antibiotics.html) with all EARS-Net antibiotic abbreviations, and knows almost all WHONET abbreviations for microorganisms. When using WHONET data as input for analysis, all input parameters will be set automatically.
Read our tutorial about [how to work with WHONET data here](./articles/WHONET.html).
#### Overview of functions
The `AMR` package basically does four important things:
1. It **cleanses existing data** by providing new *classes* for microoganisms, antibiotics and antimicrobial results (both S/I/R and MIC). By installing this package, you teach R everything about microbiology that is needed for analysis. These functions all use intelligent rules to guess results that you would expect:
* Use `as.mo()` to get a microbial ID. The IDs are human readable for the trained eye - the ID of *Klebsiella pneumoniae* is "B_KLBSL_PNE" (B stands for Bacteria) and the ID of *S. aureus* is "B_STPHY_AUR". The function takes almost any text as input that looks like the name or code of a microorganism like "E. coli", "esco" or "esccol" and tries to find expected results using intelligent rules combined with the included Catalogue of Life data set. It only takes milliseconds to find results, please see our [benchmarks](./articles/benchmarks.html). Moreover, it can group *Staphylococci* into coagulase negative and positive (CoNS and CoPS, see [source](./reference/as.mo.html#source)) and can categorise *Streptococci* into Lancefield groups (like beta-haemolytic *Streptococcus* Group B, [source](./reference/as.mo.html#source)).
* Use `as.ab()` to get an antibiotic ID. Like microbial IDs, these IDs are also human readable based on those used by EARS-Net. For example, the ID of amoxicillin is `AMX` and the ID of gentamicin is `GEN`. The `as.ab()` function also uses intelligent rules to find results like accepting misspelling, trade names and abbrevations used in many laboratory systems. For instance, the values "Furabid", "Furadantin", "nitro" all return the ID of Nitrofurantoine. To accomplish this, the package contains a database with most LIS codes, official names, trade names, ATC codes, defined daily doses (DDD) and drug categories of antibiotics.
* Use `as.rsi()` to get antibiotic interpretations based on raw MIC values (in mg/L) or disk diffusion values (in mm), or transform existing values to valid antimicrobial results. It produces just S, I or R based on your input and warns about invalid values. Even values like "<=0.002; S" (combined MIC/RSI) will result in "S".
* Use `as.mic()` to cleanse your MIC values. It produces a so-called factor (called *ordinal* in SPSS) with valid MIC values as levels. A value like "<=0.002; S" (combined MIC/RSI) will result in "<=0.002".
2. It **enhances existing data** and **adds new data** from data sets included in this package.
* Use `eucast_rules()` to apply [EUCAST expert rules to isolates](http://www.eucast.org/expert_rules_and_intrinsic_resistance/) (not the translation from MIC to RSI values).
* Use `first_isolate()` to identify the first isolates of every patient [using guidelines from the CLSI](https://clsi.org/standards/products/microbiology/documents/m39/) (Clinical and Laboratory Standards Institute).
* You can also identify first *weighted* isolates of every patient, an adjusted version of the CLSI guideline. This takes into account key antibiotics of every strain and compares them.
* Use `mdro()` (abbreviation of Multi Drug Resistant Organisms) to check your isolates for exceptional resistance with country-specific guidelines or EUCAST rules. Currently, national guidelines for Germany and the Netherlands are supported.
* The [data set `microorganisms`](./reference/microorganisms.html) contains the complete taxonomic tree of ~65,000 microorganisms. Furthermore, some colloquial names and all Gram stains are available, which enables resistance analysis of e.g. different antibiotics per Gram stain. The package also contains functions to look up values in this data set like `mo_genus()`, `mo_family()`, `mo_gramstain()` or even `mo_phylum()`. As they use `as.mo()` internally, they also use the same intelligent rules for determination. For example, `mo_genus("MRSA")` and `mo_genus("S. aureus")` will both return `"Staphylococcus"`. They also come with support for German, Dutch, Spanish, Italian, French and Portuguese. These functions can be used to add new variables to your data.
* The [data set `antibiotics`](./reference/antibiotics.html) contains ~450 antimicrobial drugs with their EARS-Net code, ATC code, PubChem compound ID, official name, common LIS codes and DDDs of both oral and parenteral administration. It also contains all (thousands of) trade names found in PubChem. The function `ab_atc()` will return the ATC code of an antibiotic as defined by the WHO. Use functions like `ab_name()`, `ab_group()` and `ab_tradenames()` to look up values. The `ab_*` functions use `as.ab()` internally so they support the same intelligent rules to guess the most probable result. For example, `ab_name("Fluclox")`, `ab_name("Floxapen")` and `ab_name("J01CF05")` will all return `"Flucloxacillin"`. These functions can again be used to add new variables to your data.
3. It **analyses the data** with convenient functions that use well-known methods.
* Calculate the resistance (and even co-resistance) of microbial isolates with the `portion_R()`, `portion_IR()`, `portion_I()`, `portion_SI()` and `portion_S()` functions. Similarly, the *number* of isolates can be determined with the `count_R()`, `count_IR()`, `count_I()`, `count_SI()` and `count_S()` functions. All these functions can be used with the `dplyr` package (e.g. in conjunction with `summarise()`)
* Plot AMR results with `geom_rsi()`, a function made for the `ggplot2` package
* Predict antimicrobial resistance for the nextcoming years using logistic regression models with the `resistance_predict()` function
4. It **teaches the user** how to use all the above actions.
* Aside from this website with many tutorials, the package itself contains extensive help pages with many examples for all functions.
* The package also contains example data sets:
* The [`septic_patients` data set](./reference/septic_patients.html). This data set contains:
* 2,000 blood culture isolates from anonymised septic patients between 2001 and 2017 in the Northern Netherlands
* Results of 40 antibiotics (each antibiotic in its own column) with a total ~40,000 antimicrobial results
* Real and genuine data
* The [`WHONET` data set](./reference/WHONET.html). This data set only contains fake data, but with the exact same structure as files exported by WHONET. Read more about WHONET [on its tutorial page](./articles/WHONET.html).
#### Partners
The development of this package is part of, related to, or made possible by:
