SSH Proxy Command -- connect.c ============================== `connect.c` is a simple relaying command to make network connection via SOCKS and https proxy. It is mainly intended to be used as proxy command of OpenSSH. You can make SSH session beyond the firewall with this command, Features of `connect.c` are: * Supports SOCKS (version 4/4a/5) and https CONNECT method. * Supports NO-AUTH and USERPASS authentication of SOCKS5 * You can input password from tty, `ssh-askpass` or environment variable. * Run on UNIX or Windows platform. * You can compile with various C compiler (cc, gcc, Visual C, Borland C. etc.) * Simple and general program independent from OpenSSH. * You can also relay local socket stream instead of standard I/O. You can download source code (http://bitbucket.org/gotoh/connect/raw/tip/connect.c[connect.c]) on the http://bitbucket.org/gotoh/connect/[project page]. Pre-compiled binary for MS Windows is also available on http://bitbucket.org/gotoh/connect/downloads/[download page]. What is proxy command? ---------------------- OpenSSH development team decides to stop supporting SOCKS and any other tunneling mechanism. It was aimed to separate complexity to support various mechanism of proxying from core code. And they recommends more flexible mechanism: ProxyCommand option instead. Proxy command mechanism is delegation of network stream communication. If ProxyCommand options is specified, SSH invoke specified external command and talk with standard I/O of thid command. Invoked command undertakes network communication with relaying to/from standard input/output including iniitial communication or negotiation for proxying. Thus, ssh can split out proxying code into external command. The `connect.c` program was made for this purpose. How to Use ---------- Get Source ~~~~~~~~~~ You can get source code from http://bitbucket.org/gotoh/connect/downloads/[project download page]. Pre-compiled MS Windows binary is also available there. Compile and Install ~~~~~~~~~~~~~~~~~~~ In most environment, you can compile `connect.c` simply. On UNIX environment, you can use cc or gcc. On Windows environment, you can use Microsoft Visual C, Borland C or Cygwin gcc. UNIX cc:: `cc connect.c -o connect` UNIX gcc:: `gcc connect.c -o connect` Solaris:: `gcc connect.c -o connect -lnsl -lsocket -lresolv` Microsoft Visual C/C++:: `cl connect.c wsock32.lib advapi32.lib` Borland C:: `bcc32 connect.c wsock32.lib advapi32.lib` Cygwin gcc:: `gcc connect.c -o connect` Mac OS/Darwin:: `gcc connect.c -o connect -lresolv` To install connect command, simply copy compiled binary to directory in your `PATH` (ex. `/usr/local/bin`). Like this: ---- $ cp connect /usr/local/bin ---- Modify your `~/.ssh/config` ~~~~~~~~~~~~~~~~~~~~~~~~~~~ Modify your `~/.ssh/config` file to use connect command as proxy command. For the case of SOCKS server is running on firewall host socks.local.net with port 1080, you can add `ProxyCommand` option in `~/.ssh/config`, like this: ---- Host remote.outside.net ProxyCommand connect -S socks.local.net %h %p ---- `%h` and `%p` will be replaced on invoking proxy command with target hostname and port specified to SSH command. If you hate writing many entries of remote hosts, following example may help you. ---- ## Outside of the firewall, use connect command with SOCKS conenction. Host * ProxyCommand connect -S socks.local.net %h %p ## Inside of the firewall, use connect command with direct connection. Host *.local.net ProxyCommand connect %h %p ---- If you want to use http proxy, use `-H` option instead of `-S` option in examle above, like this: ---- ## Outside of the firewall, with HTTP proxy Host * ProxyCommand connect -H proxy.local.net:8080 %h %p ## Inside of the firewall, direct Host *.local.net ProxyCommand connect %h %p ---- Use SSH ~~~~~~~ After editing your `~/.ssh/config` file, you are ready to use ssh. You can execute ssh without any special options as if remote host is IP reachable host. Following is an example to execute hostname command on host `remote.outside.net`. ---- local$ ssh remote.outside.net hostname Hello, this is remote.outside.net remote$ ---- Have trouble? ~~~~~~~~~~~~~ If you have trouble, execute connect command from command line with `-d` option to see what is happened. Some debug message may appear and reports progress. This information may tell you what is wrong. In this example, error has occurred on authentication stage of SOCKS5 protocol. ---- $ connect -d -S socks.local.net unknown.remote.outside.net 110 DEBUG: relay_method = SOCKS (2) DEBUG: relay_host=socks.local.net DEBUG: relay_port=1080 DEBUG: relay_user=gotoh DEBUG: socks_version=5 DEBUG: socks_resolve=REMOTE (2) DEBUG: local_type=stdio DEBUG: dest_host=unknown.remote.outside.net DEBUG: dest_port=110 DEBUG: Program is $Revision: 1.20 $ DEBUG: connecting to xxx.xxx.xxx.xxx:1080 DEBUG: begin_socks_relay() DEBUG: atomic_out() [4 bytes] DEBUG: >>> 05 02 00 02 DEBUG: atomic_in() [2 bytes] DEBUG: <<< 05 02 DEBUG: auth method: USERPASS DEBUG: atomic_out() [some bytes] DEBUG: >>> xx xx xx xx ... DEBUG: atomic_in() [2 bytes] DEBUG: <<< 01 01 ERROR: Authentication faield. FATAL: failed to begin relaying via SOCKS. ---- More Detail ----------- Command line usage is here: ---- usage: connect [-dnhs45] [-R resolve] [-p local-port] [-w sec] [-H [user@]proxy-server[:port]] [-S [user@]socks-server[:port]] host port ---- host and port is target hostname and port-number to connect. `-H` [user@]server[:port]:: Specify hostname and port number of http proxy server to relay. If port is omitted, 80 is used. `-h`:: Use HTTP proxy via proxy server sepcified by environment variable `HTTP_PROXY`. `-S` \[_user_@]_server_\[:_port_]:: Specify hostname and port number of SOCKS server to relay. Like `-H` option, port number can be omit and default is 1080. `-s`:: Use SOCKS proxy via SOCKS server sepcified by environment variable `SOCKS5_SERVER`. `-4`:: Use SOCKS version 4 protocol. This option must be used with `-S`. `-5`:: Use SOCKS version 5 protocol. This option must be used with `-S`. `-R` _method_:: The method to resolve hostname. 3 keywords (`local`, `remote`, `both`) or dot-notation IP address is allowed. Keyword both means; _"Try local first, then remote"_. If dot-notation IP address is specified, use this host as nameserver (UNIX only). Default is remote for SOCKS5 or local for others. On SOCKS4 protocol, remote resolving method (remote and both) use protocol version 4a. `-p` _port_:: Accept on local TCP port and relay it instead of standard input and output. With this option, program will terminate when remote or local TCP session is closed. `-w` _timeout_:: Timeout seconds for connecting to remote host. `-a` _auth_:: option specifiys user intended authentication methods separated by comma. Currently `userpass` and `none` are supported. Default is userpass. You can also specifying this parameter by the environment variable `SOCKS5_AUTH`. `-d`: Run with debug message output. If you fail to connect, use this option to see what is done. As additional feature, you can omit port argument when program name is special format containing port number itself like "connect-25". For example: ---- $ ln -s connect connect-25 $ ./connect-25 smtphost.outside.net 220 smtphost.outside.net ESMTP Sendmail QUIT 221 2.0.0 smtphost.remote.net closing connection $ ---- This example means that the command name "connect-25" indicates port number 25 so you can omit 2nd argument (and used if specified explicitly). This is usefull for the application which invokes only with hostname argument. Specifying user name via environment variables ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ There are 5 environemnt variables to specify user name without command line option. This mechanism is usefull for the user who using another user name different from system account. `SOCKS5_USER`:: Used for SOCKS v5 access. `SOCKS4_USER`:: Used for SOCKS v4 access. `SOCKS_USER`:: Used for SOCKS v5 or v4 access and varaibles above are not defined. `HTTP_PROXY_USER`:: Used for HTTP proxy access. `CONNECT_USER`:: Used for all type of access if all above are not defined. Following table describes how user name is determined. Left most number is order to check. If variable is not defined, check next variable, and so on. [width="50%"] |==== | | SOCKS v5 | SOCKS v4 | HTTP proxy | 1 | `SOCKS5_USER` | `SOCKS4_USER` .2+^| `HTTP_PROXY_USER` | 2 2+^| `SOCKS_USER` | 3 3+^| `CONNECT_USER` | 4 3+^| (query user name to system) |==== Specifying password via environment variables ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ There are 5 environemnt variables to specify password. If you use this feature, please note that it is not secure way. `SOCKS5_PASSWD`:: Used for SOCKS v5 access. This variables is compatible with NEC SOCKS implementation. `SOCKS5_PASSWORD`:: Used for SOCKS v5 access if `SOCKS5_PASSWD` is not defined. `SOCKS_PASSWORD`:: Used for SOCKS v5 (or v4) access all above is not defined. `HTTP_PROXY_PASSWORD`:: Used for HTTP proxy access. `CONNECT_PASSWORD`:: Used for all type of access if all above are not defined. Following table describes how password is determined. Left most number is order to check. If variable is not defined, check next variable, and so on. Finally ask to user interactively using external program or tty input. [width="50%"] |==== | | SOCKS v5 | HTTP proxy | 1 | `SOCKS5_PASSWD` .2+^| `HTTP_PROXY_PASSWORD` | 2 | `SOCKS_PASSWORD` | 3 2+^| `CONNECT_PASSWORD` | 4 2+^| (ask to user interactively) |==== Limitations ----------- SOCKS5 authentication ~~~~~~~~~~~~~~~~~~~~~ Only NO-AUTH and USER/PASSWORD authentications are supported. GSSAPI authentication (RFC 1961) and other draft authentications (CHAP, EAP, MAF, etc.) is not supported. HTTP authentication ~~~~~~~~~~~~~~~~~~~ BASIC authentication is supported but DIGEST authentication is not. Switching proxy server on event ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ There is no mechanism to switch proxy server regarding to PC environment. This limitation might be bad news for mobile user. Since I do not want to make this program complex, I do not want to support although this feature is already requested. Please advice me if there is good idea of detecting environment to swich and simple way to specify conditioned directive of servers. One tricky workaround exists. It is replacing `~/.ssh/config` file by script on ppp up/down. There's another example of wrapper script (contributed by Darren Tucker). This script costs executing ifconfig and grep to detect current environment, but it works. Note that you should modify addresses if you use it. ---- #!/bin/sh ## ~/bin/myconnect --- Proxy server switching wrapper if ifconfig eth0 |grep "inet addr:192\.168\.1" >/dev/null; then opts="-S 192.168.1.1:1080" elif ifconfig eth0 |grep "inet addr:10\." >/dev/null; then opts="-H 10.1.1.1:80" else opts="-s" fi exec /usr/local/bin/connect $opts $@ ---- Tips ---- Proxying socket connection ~~~~~~~~~~~~~~~~~~~~~~~~~~ In usual, `connect.c` relays network connection to/from standard input/output. By specifying -p option, however, `connect.c` relays local network stream instead of standard input/output. With this option, connect command waits connection from other program, then start relaying between both network stream. This feature may be useful for the program which is hard to SOCKSify. Use with ssh-askpass command ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ `connect.c` ask you password when authentication is required. If you are using on tty/pty terminal, connect can input from terminal with prompt. But you can also use ssh-askpass program to input password. If you are graphical environment like X Window or MS Windows, and program does not have tty/pty, and environment variable `SSH_ASKPASS` is specified, then `connect.c` invoke command specified by environment variable SSH_ASKPASS to input password. ssh-askpass program might be installed if you are using OpenSSH on UNIX environment. On Windows environment, pre-compiled binary is available from here. This feature is limited on window system environment. And also useful on Emacs on MS Windows (NT Emacs or Meadow). It is hard to send passphrase to connect command (and also ssh) because external command is invoked on hidden terminal and do I/O with this terminal. Using ssh-askpass avoids this problem. Use for Network Stream of Emacs ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Although `connect.c` is made for OpenSSH, it is generic and independent from OpenSSH. So we can use this for other purpose. For example, you can use this command in Emacs to open network connection with remote host over the firewall via SOCKS or HTTP proxy without SOCKSifying Emacs itself. There is sample code: http://bitbucket.org/gotoh/connect/src/tip/relay.el With this code, you can use `relay-open-network-stream` function instead of `open-network-stream` to make network connection. See top comments of the source for more detail. Remote resolver ~~~~~~~~~~~~~~~ If you are SOCKS4 user on UNIX environment, you might want specify nameserver to resolve remote hostname. You can do it specifying `-R` option followed by IP address of resolver. Hopping Connection via SSH ~~~~~~~~~~~~~~~~~~~~~~~~~~ Conbination of ssh and connect command have more interesting usage. Following command makes indirect connection to host2:port from your current host via host1. ---- $ ssh host1 connect host2 port ---- This method is useful for the situations like: * You are outside of organizasion now, but you want to access an internal host barriered by firewall. * You want to use some service which is allowed only from some limited hosts. For example, I want to use local NetNews service in my office from home. I cannot make NNTP session directly because NNTP host is barriered by firewall. Fortunately, I have ssh account on internal host and allowed using SOCKS5 on firewall from outside. So I use following command to connect to NNTP service. ---- $ ssh host1 connect news 119 200 news.my-office.com InterNetNews NNRP server INN 2.3.2 ready (posting ok). quit 205 . $ ---- By combinating hopping connection and relay.el, I can read NetNews using http://www.gohome.org/wl/[Wanderlust] on Emacs at home. ---- | External (internet) | Internal (office) | +------+ +----------+ +-------+ +-----------+ | HOME | | firewall | | host1 | | NNTP host | +------+ +----------+ +-------+ +-----------+ emacs <-------------- ssh ---------------> sshd <-- connect --> nntpd <-- connect --> socksd <-- SOCKS --> ---- As an advanced example, you can use SSH hopping as fetchmail's plug-in program to access via secure tunnel. This method requires that connect program is insatalled on remote host. There's example of .fetchmailrc bellow. When fetchmail access to mail-server, you will login to remote host using SSH then execute connect program on remote host to relay conversation with pop server. Thus fetchmail can retrieve mails in secure. ---- poll mail-server protocol pop3 plugin "ssh %h connect localhost %p" username "username" password "password" ---- Break The More Restricted Wall ------------------------------ If firewall does not provide SOCKS nor HTTPS other than port 443, you cannot break the wall in usual way. But if you have you own host which is accessible from internet, you can make ssh connection to your own host by configuring sshd as waiting at port 443 instead of standard 22. By this, you can login to your own host via port 443. Once you have logged-in to extenal home machine, you can execute connect as second hop to make connection from your own host to final target host, like this: ---- internal$ cat ~/.ssh/config Host home ProxyCommand connect -H firewall:8080 %h 443 Host server # internal ProxyCommand ssh home connect %h %p internal$ ssh home You are logged in to home! home# exit internal$ ssh server You are logged in to server! server# exit internal$ ---- This way is similar to "Hopping connection via SSH" except configuring outer sshd as waiting at port 443 (https). This means that you have a capability to break the strongly restricted wall if you have own host out side of the wall. ---- | Internal (office) | External (internet) | +--------+ +----------+ +------+ +--------+ | office | | firewall | | home | | server | +--------+ +----------+ +------+ +--------+ <------------------ ssh --------------------->sshd:443 <-- connect --> http-proxy <-- https:443 --> any connect <-- tcp --> port ---- NOTE: If you wanna use this, you should give up hosting https service at port 443 on you external host 'home'. F.Y.I. ------ Difference between SOCKS versions ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ SOCKS version 4 is first popular implementation which is documented http://www.socks.nec.com/protocol/socks4.protocol[here]. Since this protocol provide IP address based requesting, client program should resolve name of outer host by itself. Version 4a (documented http://www.socks.nec.com/protocol/socks4a.protocol[here]) is enhanced to allow request by hostname instead of IP address. SOCKS version 5 is re-designed protocol stands on experience of version 4 and 4a. There is no compativility with previous versions. Instead, there's some improvement: IPv6 support, request by hostname, UDP proxying, etc. Configuration to use HTTPS ~~~~~~~~~~~~~~~~~~~~~~~~~~ Many http proxy servers implementation supports https CONNECT method (SLL). You might add configuration to allow using https. For the example of http://www.delegate.org/delegate/[DeleGate] (DeleGate is a multi-purpose application level gateway, or a proxy server) , you should add https to REMITTABLE parameter to allow HTTP-Proxy like this: ---- delegated -Pxxxx ...... REMITTABLE='+,https' ... ---- For the case of Squid, you should allow target ports via https by ACL, and so on. SOCKS5 Servers ~~~~~~~~~~~~~~ http://www.socks.nec.com/refsoftware.html[NEC SOCKS Reference Implementation]:: Reference implementation of SOKCS server and library. http://www.inet.no/dante/index.html[Dante]:: Dante is free implementation of SOKCS server and library. Many enhancements and modulalized. http://www.delegate.org/delegate/[DeleGate]:: DeleGate is multi function proxy service provider. DeleGate 5.x.x or earlier can be SOCKS4 server, and 6.x.x can be SOCKS5 and SOCKS4 server. and 7.7.0 or later can be SOCKS5 and SOCKS4a server. Specifications ~~~~~~~~~~~~~~ http://www.socks.nec.com/protocol/socks4.protocol[socks4.protocol.txt]:: SOCKS: A protocol for TCP proxy across firewalls http://www.socks.nec.com/protocol/socks4a.protocol[socks4a.protocol.txt]:: SOCKS 4A: A Simple Extension to SOCKS 4 Protocol http://www.socks.nec.com/rfc/rfc1928.txt[RFC 1928]:: SOCKS Protocol Version 5 http://www.socks.nec.com/rfc/rfc1929.txt[RFC 1929]:: Username/Password Authentication for SOCKS V5 http://www.ietf.org/rfc/rfc2616.txt[RFC 2616]:: Hypertext Transfer Protocol -- HTTP/1.1 http://www.ietf.org/rfc/rfc2617.txt[RFC 2617]:: HTTP Authentication: Basic and Digest Access Authentication Related Links ~~~~~~~~~~~~~ * http://www.openssh.org/[OpenSSH Home] * http://www.ssh.com/[Proprietary SSH] * http://www.taiyo.co.jp/~gotoh/ssh/openssh-socks.html[Using OpenSSH through a SOCKS compatible PROXY on your LAN] (J. Grant) Similars ~~~~~~~~ http://proxytunnel.sourceforge.net/[Proxy Tunnel]:: Proxying command using https CONNECT. http://www.snurgle.org/~griffon/ssh-https-tunnel[stunnel]:: Proxy through an https tunnel (Perl script) // This document is rescured from the document // in the internet web cache. // Original date of this document is 2004-09-06.