AMR

An R package to simplify the analysis and prediction of Antimicrobial Resistance (AMR) and work with antibiotic properties by using evidence-based methods.

This R package was created for academic research by PhD students of the Faculty of Medical Sciences of the University of Groningen and the Medical Microbiology & Infection Prevention (MMBI) department of the University Medical Center Groningen (UMCG).

▶️ Get it with install.packages("AMR") or see below for other possibilities. Read all changes and new functions in NEWS.md.

Authors

Matthijs S. Berends^1,2,a, Christian F. Luz^1,a, Erwin E.A. Hassing², Corinna Glasner^1,b, Alex W. Friedrich^1,b, Bhanu Sinha^1,b

¹ Department of Medical Microbiology, University of Groningen, University Medical Center Groningen, Groningen, the Netherlands - rug.nl umcg.nl
² Certe Medical Diagnostics & Advice, Groningen, the Netherlands - certe.nl
^a R package author and thesis dissertant
^b Thesis advisor

Contents

• Why this package?
  • ITIS
• How to get it?
  • Install from CRAN
  • Install from Zenodo
  • Install from GitHub
• How to use it?
  • New classes
  • Overwrite/force resistance based on EUCAST rules
  • Other (microbial) epidemiological functions
  • Frequency tables
  • Data sets included in package
• Benchmarks
• Copyright

Why this package?

This R package was intended to make microbial epidemiology easier. Most functions contain extensive help pages to get started.

The AMR package basically does four important things:

1. It cleanses existing data, by transforming it to reproducible and profound classes, making the most efficient use of R. These functions all use artificial intelligence to guess results that you would expect:

   • Use as.mo to get an ID of a microorganism. The IDs are human readable for the trained eye - the ID of Klebsiella pneumoniae is "B_KLBSL_PNE" (B stands for Bacteria) and the ID of S. aureus is "B_STPHY_AUR". The function takes almost any text as input that looks like the name or code of a microorganism like "E. coli", "esco" and "esccol". Even as.mo("MRSA") will return the ID of S. aureus. Moreover, it can group all coagulase negative and positive Staphylococci, and can transform Streptococci into Lancefield groups. To find bacteria based on your input, it uses Artificial Intelligence to look up values in the included ITIS data, consisting of more than 18,000 microorganisms.
   • Use as.rsi to transform values to valid antimicrobial results. It produces just S, I or R based on your input and warns about invalid values. Even values like "<=0.002; S" (combined MIC/RSI) will result in "S".
   • Use as.mic to cleanse your MIC values. It produces a so-called factor (called ordinal in SPSS) with valid MIC values as levels. A value like "<=0.002; S" (combined MIC/RSI) will result in "<=0.002".
   • Use as.atc to get the ATC code of an antibiotic as defined by the WHO. This package contains a database with most LIS codes, official names, DDDs and even trade names of antibiotics. For example, the values "Furabid", "Furadantin", "nitro" all return the ATC code of Nitrofurantoine.

2. It enhances existing data and adds new data from data sets included in this package.

   • Use EUCAST_rules to apply EUCAST expert rules to isolates.
   • Use first_isolate to identify the first isolates of every patient using guidelines from the CLSI (Clinical and Laboratory Standards Institute).
     • You can also identify first weighted isolates of every patient, an adjusted version of the CLSI guideline. This takes into account key antibiotics of every strain and compares them.
   • Use MDRO (abbreviation of Multi Drug Resistant Organisms) to check your isolates for exceptional resistance with country-specific guidelines or EUCAST rules. Currently, national guidelines for Germany and the Netherlands are supported.
   • The data set microorganisms contains the complete taxonomic tree of more than 18,000 microorganisms (bacteria, fungi/yeasts and protozoa). Furthermore, the colloquial name and Gram stain are available, which enables resistance analysis of e.g. different antibiotics per Gram stain. The package also contains functions to look up values in this data set like mo_genus, mo_family, mo_gramstain or even mo_phylum. As they use as.mo internally, they also use artificial intelligence. For example, mo_genus("MRSA") and mo_genus("S. aureus") will both return "Staphylococcus". They also come with support for German, Dutch, French, Italian, Spanish and Portuguese. These functions can be used to add new variables to your data.
   • The data set antibiotics contains the ATC code, LIS codes, official name, trivial name and DDD of both oral and parenteral administration. It also contains a total of 298 trade names. Use functions like ab_name and ab_tradenames to look up values. The ab_* functions use as.atc internally so they support AI to guess your expected result. For example, ab_name("Fluclox"), ab_name("Floxapen") and ab_name("J01CF05") will all return "Flucloxacillin". These functions can again be used to add new variables to your data.

3. It analyses the data with convenient functions that use well-known methods.

   • Calculate the resistance (and even co-resistance) of microbial isolates with the portion_R, portion_IR, portion_I, portion_SI and portion_S functions. Similarly, the amount of isolates can be determined with the count_R, count_IR, count_I, count_SI and count_S functions. All these functions can be used with the dplyr package (e.g. in conjunction with summarise)
   • Plot AMR results with geom_rsi, a function made for the ggplot2 package
   • Predict antimicrobial resistance for the nextcoming years using logistic regression models with the resistance_predict function
   • Conduct descriptive statistics to enhance base R: calculate kurtosis, skewness and create frequency tables

4. It teaches the user how to use all the above actions.

   • The package contains extensive help pages with many examples.
   • It also contains an example data set called septic_patients. This data set contains:
     • 2,000 blood culture isolates from anonymised septic patients between 2001 and 2017 in the Northern Netherlands
     • Results of 40 antibiotics (each antibiotic in its own column) with a total of 38,414 antimicrobial results
     • Real and genuine data

ITIS

This package contains the complete microbial taxonomic data (with all seven taxonomic ranks - from subkingdom to subspecies) from the publicly available Integrated Taxonomic Information System (ITIS, https://www.itis.gov).

All (sub)species from the taxonomic kingdoms Bacteria, Fungi and Protozoa are included in this package, as well as all previously accepted names known to ITIS. Furthermore, the responsible authors and year of publication are available. This allows users to use authoritative taxonomic information for their data analysis on any microorganism, not only human pathogens.

ITIS is a partnership of U.S., Canadian, and Mexican agencies and taxonomic specialists.

Get a note when a species was renamed

mo_shortname("Chlamydia psittaci")
# Note: 'Chlamydia psittaci' (Page, 1968) was renamed 'Chlamydophila psittaci' (Everett et al., 1999)
# [1] "C. psittaci"

Get any property from the entire taxonomic tree for all included species

mo_class("E. coli")
# [1] "Gammaproteobacteria"

mo_family("E. coli")
# [1] "Enterobacteriaceae"

mo_ref("E. coli")
# [1] "Castellani and Chalmers, 1919"

Do not get mistaken - the package only includes microorganisms

mo_phylum("C. elegans")
# [1] "Cyanobacteria"                   # Bacteria?!
mo_fullname("C. elegans")
# [1] "Chroococcus limneticus elegans"  # Because a microorganism was found 

How to get it?

All stable versions of this package are published on CRAN, the official R network with a peer-reviewed submission process.

Install from CRAN

(Note: Downloads measured only by cran.rstudio.com, this excludes e.g. the official cran.r-project.org)

• Install using RStudio (recommended):

  • Click on Tools and then Install Packages...
  • Type in AMR and press Install

• Install in R directly:

  • install.packages("AMR")

Install from Zenodo

This package was also published on Zenodo (stable releases only): https://doi.org/10.5281/zenodo.1305355

Install from GitHub

This is the latest development version. Although it may contain bugfixes and even new functions compared to the latest released version on CRAN, it is also subject to change and may be unstable or behave unexpectedly. Always consider this a beta version. All below 'badges' should be green:

Development Test	Result	Reference
All functions checked on Linux and macOS		Travis CI, GmbH [ref 1]
All functions checked on Windows		Appveyor Systems Inc. [ref 2]
Percentage of syntax lines checked		Codecov LLC [ref 3]

If so, try it with:

install.packages("devtools") 
devtools::install_github("msberends/AMR")

How to use it?

# Call it with:
library(AMR)

# For a list of functions:
help(package = "AMR")

New classes

This package contains two new S3 classes: mic for MIC values (e.g. from Vitek or Phoenix) and rsi for antimicrobial drug interpretations (i.e. S, I and R). Both are actually ordered factors under the hood (an MIC of 2 being higher than <=1 but lower than >=32, and for class rsi factors are ordered as S < I < R). Both classes have extensions for existing generic functions like print, summary and plot.

These functions also try to coerce valid values.

RSI

The septic_patients data set comes with antimicrobial results of more than 40 different drugs. For example, columns amox and cipr contain results of amoxicillin and ciprofloxacin, respectively.

summary(septic_patients[, c("amox", "cipr")])
#      amox          cipr     
#  Mode  :rsi    Mode  :rsi   
#  <NA>  :1002   <NA>  :596   
#  Sum S :336    Sum S :1108  
#  Sum IR:662    Sum IR:296   
#  -Sum R:659    -Sum R:227   
#  -Sum I:3      -Sum I:69  

You can use the plot function from base R:

plot(septic_patients$cipr)

Or use the ggplot2 and dplyr packages to create more appealing plots:

library(dplyr)
library(ggplot2)

septic_patients %>%
  select(amox, nitr, fosf, trim, cipr) %>%
  ggplot_rsi()

Adjust it with any parameter you know from the ggplot2 package:

septic_patients %>%
  select(amox, nitr, fosf, trim, cipr) %>%
  ggplot_rsi(datalabels = FALSE, 
             width = 0.5, colour = "black", size = 1, linetype = 2, alpha = 0.25)

It also supports grouping variables. Let's say we want to compare resistance of drugs against Urine Tract Infections (UTI) between hospitals A to D (variable hospital_id):

septic_patients %>%
  select(hospital_id, amox, nitr, fosf, trim, cipr) %>%
  group_by(hospital_id) %>%
  ggplot_rsi(x = "hospital_id",
             facet = "Antibiotic",
             nrow = 1,
             datalabels = FALSE) +
  labs(title = "AMR of Anti-UTI Drugs Per Hospital",
       x = "Hospital")

You could use this to group on anything in your plots: Gram stain, age (group), genus, geographic location, et cetera.

MIC

# Transform values to new class
mic_data <- as.mic(c(">=32", "1.0", "8", "<=0.128", "8", "16", "16"))

summary(mic_data)
#  Mode:mic      
#  <NA>:0        
#  Min.:<=0.128  
#  Max.:>=32 

plot(mic_data)

Overwrite/force resistance based on EUCAST rules

This is also called interpretive reading.

before <- data.frame(bact = c("STAAUR",  # Staphylococcus aureus
                                "ENCFAE",  # Enterococcus faecalis
                                "ESCCOL",  # Escherichia coli
                                "KLEPNE",  # Klebsiella pneumoniae
                                "PSEAER"), # Pseudomonas aeruginosa
                     vanc = "-",           # Vancomycin
                     amox = "-",           # Amoxicillin
                     coli = "-",           # Colistin
                     cfta = "-",           # Ceftazidime
                     cfur = "-",           # Cefuroxime
                     stringsAsFactors = FALSE)
before
#   bact   vanc amox coli cfta cfur
# 1 STAAUR    -    -    -    -    -
# 2 ENCFAE    -    -    -    -    -
# 3 ESCCOL    -    -    -    -    -
# 4 KLEPNE    -    -    -    -    -
# 5 PSEAER    -    -    -    -    -

# Now apply those rules; just need a column with bacteria IDs and antibiotic results:
after <- EUCAST_rules(before, col_mo = "bact")
after
#   bact   vanc amox coli cfta cfur
# 1 STAAUR    -    -    R    R    -
# 2 ENCFAE    -    -    R    R    R
# 3 ESCCOL    R    -    -    -    -
# 4 KLEPNE    R    R    -    -    -
# 5 PSEAER    R    R    -    -    R

Bacteria IDs can be retrieved with the guess_mo function. It uses any type of info about a microorganism as input. For example, all these will return value STAAUR, the ID of S. aureus:

guess_mo("stau")
guess_mo("STAU")
guess_mo("staaur")
guess_mo("S. aureus")
guess_mo("S aureus")
guess_mo("Staphylococcus aureus")
guess_mo("MRSA") # Methicillin Resistant S. aureus
guess_mo("VISA") # Vancomycin Intermediate S. aureus
guess_mo("VRSA") # Vancomycin Resistant S. aureus

Other (microbial) epidemiological functions

# G-test to replace Chi squared test
g.test(...)

# Determine key antibiotic based on bacteria ID
key_antibiotics(...)

# Selection of first isolates of any patient
first_isolate(...)

# Calculate resistance levels of antibiotics, can be used with `summarise` (dplyr)
rsi(...)
# Predict resistance levels of antibiotics
rsi_predict(...)

# Get name of antibiotic by ATC code
abname(...)
abname("J01CR02", from = "atc", to = "umcg") # "AMCL"

Frequency tables

Base R lacks a simple function to create frequency tables. We created such a function that works with almost all data types: freq (or frequency_tbl). It can be used in two ways:

# Like base R:
freq(mydata$myvariable)

# And like tidyverse:
mydata %>% freq(myvariable)

Factors sort on item by default:

septic_patients %>% freq(hospital_id)
# Frequency table of `hospital_id` 
# Class:     factor
# Length:    2000 (of which NA: 0 = 0.0%)
# Unique:    4
# 
#      Item    Count   Percent   Cum. Count   Cum. Percent   (Factor Level)
# ---  -----  ------  --------  -----------  -------------  ---------------
# 1    A         319     16.0%          319          16.0%                1
# 2    B         661     33.1%          980          49.0%                2
# 3    C         256     12.8%         1236          61.8%                3
# 4    D         764     38.2%         2000         100.0%                4

This can be changed with the sort.count parameter:

septic_patients %>% freq(hospital_id, sort.count = TRUE)
# Frequency table of `hospital_id` 
# Class:     factor
# Length:    2000 (of which NA: 0 = 0.0%)
# Unique:    4
# 
#      Item    Count   Percent   Cum. Count   Cum. Percent   (Factor Level)
# ---  -----  ------  --------  -----------  -------------  ---------------
# 1    D         764     38.2%          764          38.2%                4
# 2    B         661     33.1%         1425          71.2%                2
# 3    A         319     16.0%         1744          87.2%                1
# 4    C         256     12.8%         2000         100.0%                3

All other types, like numbers, characters and dates, sort on count by default:

septic_patients %>% freq(date)
# Frequency table of `date` 
# Class:     Date
# Length:    2000 (of which NA: 0 = 0.0%)
# Unique:    1151
# 
# Oldest:    2 January 2002
# Newest:    28 December 2017 (+5839)
# Median:    7 Augustus 2009 (~48%)
# 
#      Item          Count   Percent   Cum. Count   Cum. Percent
# ---  -----------  ------  --------  -----------  -------------
# 1    2016-05-21       10      0.5%           10           0.5%
# 2    2004-11-15        8      0.4%           18           0.9%
# 3    2013-07-29        8      0.4%           26           1.3%
# 4    2017-06-12        8      0.4%           34           1.7%
# 5    2015-11-19        7      0.4%           41           2.1%
# 6    2005-12-22        6      0.3%           47           2.4%
# 7    2015-10-12        6      0.3%           53           2.6%
# 8    2002-05-16        5      0.2%           58           2.9%
# 9    2004-02-02        5      0.2%           63           3.1%
# 10   2004-02-18        5      0.2%           68           3.4%
# 11   2005-08-16        5      0.2%           73           3.6%
# 12   2005-09-01        5      0.2%           78           3.9%
# 13   2006-06-29        5      0.2%           83           4.2%
# 14   2007-08-10        5      0.2%           88           4.4%
# 15   2008-08-29        5      0.2%           93           4.7%
# [ reached getOption("max.print.freq") -- omitted 1136 entries, n = 1907 (95.3%) ]

For numeric values, some extra descriptive statistics will be calculated:

freq(runif(n = 10, min = 1, max = 5))
# Frequency table  
# Class:     numeric
# Length:    10 (of which NA: 0 = 0.0%)
# Unique:    10
# 
# Mean:      3.4
# Std. dev.: 1.3 (CV: 0.38, MAD: 1.3)
# Five-Num:  1.6 | 2.0 | 3.9 | 4.7 | 4.8 (IQR: 2.7, CQV: 0.4)
# Outliers:  0
# 
#           Item   Count   Percent   Cum. Count   Cum. Percent
# ---  ---------  ------  --------  -----------  -------------
# 1     1.568997       1     10.0%            1          10.0%
# 2     1.993575       1     10.0%            2          20.0%
# 3     2.022348       1     10.0%            3          30.0%
# 4     2.236038       1     10.0%            4          40.0%
# 5     3.579828       1     10.0%            5          50.0%
# 6     4.178081       1     10.0%            6          60.0%
# 7     4.394818       1     10.0%            7          70.0%
# 8     4.689871       1     10.0%            8          80.0%
# 9     4.698626       1     10.0%            9          90.0%
# 10    4.751488       1     10.0%           10         100.0%
# 
# Warning message:
# All observations are unique. 

Learn more about this function with:

?freq

Data sets included in package

Data sets to work with antibiotics and bacteria properties.

# Data set with complete taxonomic trees from ITIS, containing of 
# the three kingdoms Bacteria, Fungi and Protozoa
microorganisms    # A tibble: 18,831 x 15

# Data set with 2000 random blood culture isolates from anonymised
# septic patients between 2001 and 2017 in 5 Dutch hospitals
septic_patients   # A tibble: 2,000 x 49

# Data set with ATC antibiotics codes, official names, trade names 
# and DDDs (oral and parenteral)
antibiotics       # A tibble: 423 x 18

Benchmarks

One of the most important features of this package is the complete microbial taxonomic database, supplied by ITIS (https://www.itis.gov). We created a function as.mo that transforms any user input value to a valid microbial ID by using AI (Artificial Intelligence) and based on the taxonomic tree of ITIS.

Using the microbenchmark package, we can review the calculation performance of this function.

library(microbenchmark)

In the next test, we try to 'coerce' different input values for Staphylococcus aureus. The actual result is the same every time: it returns its MO code B_STAPHY_AUR (B stands for Bacteria, the taxonomic kingdom).

But the calculation time differs a lot. Here, the AI effect can be reviewed best:

microbenchmark(A = as.mo("stau"),
               B = as.mo("staaur"),
               C = as.mo("S. aureus"),
               D = as.mo("S.  aureus"),
               E = as.mo("STAAUR"),
               F = as.mo("Staphylococcus aureus"),
               times = 10,
               unit = "ms")
# Unit: milliseconds
#  expr      min       lq     mean   median       uq      max neval
#     A 36.05088 36.14782 36.65635 36.24466 36.43075 39.78544    10
#     B 16.43575 16.46885 16.67816 16.66053 16.84858 16.95299    10
#     C 14.44150 14.52182 16.81197 14.59173 14.67854 36.75244    10
#     D 14.49765 14.58153 16.71666 14.59414 14.61094 35.50731    10
#     E 14.45212 14.75146 14.82033 14.85559 14.96433 15.03438    10
#     F 10.69445 10.73852 10.80334 10.79596 10.86856 10.97465    10

The more an input value resembles a full name, the faster the result will be found. In the table above, all measurements are in milliseconds, tested on a quite regular Linux server from 2007 with 2 GB RAM. A value of 10.8 milliseconds means it can roughly determine 93 different input values per second. It case of 36.2 milliseconds, this is only 28 input values per second.

To improve speed, the as.mo function also takes into account the prevalence of human pathogenic microorganisms. The downside is of course that less prevalent microorganisms will be determined far less faster. See this example for the ID of Burkholderia nodosa (B_BRKHL_NOD):

microbenchmark(B = as.mo("burnod"),
               C = as.mo("B. nodosa"),
               D = as.mo("B.  nodosa"),
               E = as.mo("BURNOD"),
               F = as.mo("Burkholderia nodosa"),
               times = 10,
               unit = "ms")
# Unit: milliseconds
#  expr      min        lq      mean    median        uq       max neval
#     B 175.9446 176.80440 179.18240 177.00131 177.62021 198.86286    10
#     C  88.1902  88.57705  89.08851  88.84293  89.15498  91.76621    10
#     D 110.2641 110.67497 113.66290 111.20534 111.80744 134.44699    10
#     E 175.0728 177.04235 207.83542 190.38109 200.33448 388.12177    10
#     F  45.0778  45.31617  52.72430  45.62962  67.85262  70.42250    10

(Note: A is missing here, because as.mo("buno") returns F_BUELL_NOT: the ID of the fungus Buellia notabilis)

That takes up to 12 times as much time! A value of 190.4 milliseconds means it can only determine 5 different input values per second. We can conclude that looking up arbitrary codes of less prevalent microorganisms is the worst way to go, in terms of calculation performance.

To relieve this pitfall and further improve performance, two important calculations take almost no time at all: repetive results and already precalculated results.

Let's set up 25,000 entries of "Staphylococcus aureus" and check its speed:

repetive_results <- rep("Staphylococcus aureus", 25000)
microbenchmark(A = as.mo(repetive_results),
               times = 10,
               unit = "ms")
# Unit: milliseconds
#  expr      min       lq     mean   median       uq      max neval
#     A 14.61282  14.6372 14.70817 14.72597 14.76124 14.78498    10

So transforming 25,000 times (!) "Staphylococcus aureus" only takes 4 ms (0.004 seconds) more than transforming it once. You only lose time on your unique input values.

What about precalculated results? This package also contains helper functions for specific microbial properties, for example mo_fullname. It returns the full microbial name (genus, species and possibly subspecies) and uses as.mo internally. If the input is however an already precalculated result, it almost doesn't take any time at all (see 'C' below):

microbenchmark(A = mo_fullname("B_STPHY_AUR"),
               B = mo_fullname("S. aureus"),
               C = mo_fullname("Staphylococcus aureus"),
               times = 10,
               unit = "ms")
# Unit: milliseconds
#  expr       min       lq       mean    median        uq       max neval
#     A 13.548652 13.74588 13.8052969 13.813594 13.881165 14.090969    10
#     B 15.079781 15.16785 15.3835842 15.374477 15.395115 16.072995    10
#     C  0.171182  0.18563  0.2306307  0.203413  0.224610  0.492312    10

So going from mo_fullname("Staphylococcus aureus") to "Staphylococcus aureus" takes 0.0002 seconds - it doesn't even start calculating if the result would be the same as the expected resulting value. That goes for all helper functions:

microbenchmark(A = mo_species("aureus"),
               B = mo_genus("Staphylococcus"),
               C = mo_fullname("Staphylococcus aureus"),
               D = mo_family("Staphylococcaceae"),
               E = mo_order("Bacillales"),
               F = mo_class("Bacilli"),
               G = mo_phylum("Firmicutes"),
               H = mo_subkingdom("Posibacteria"),
               times = 10,
               unit = "ms")
# Unit: milliseconds
#  expr      min       lq      mean    median       uq      max neval
#     A 0.145270 0.158750 0.1908419 0.1693655 0.218255 0.300528    10
#     B 0.182985 0.184522 0.2025408 0.1970235 0.209944 0.243328    10
#     C 0.176280 0.201632 0.2618147 0.2303025 0.339499 0.388249    10
#     D 0.136890 0.139054 0.1552231 0.1518010 0.168738 0.193042    10
#     E 0.100921 0.116496 0.1321823 0.1222930 0.129976 0.230477    10
#     F 0.103017 0.110281 0.1214480 0.1199880 0.124319 0.147506    10
#     G 0.099246 0.110280 0.1195553 0.1188705 0.125436 0.149741    10
#     H 0.114331 0.117264 0.1249819 0.1220830 0.129557 0.143385    10

Of course, when running mo_phylum("Firmicutes") the function has zero knowledge about the actual microorganism, namely S. aureus. But since the result would be "Firmicutes" too, there is no point in calculating the result. And since this package 'knows' all phyla of all known microorganisms (according to ITIS), it can just return the initial value immediately.

Copyright

This R package is licensed under the GNU General Public License (GPL) v2.0. In a nutshell, this means that this package:

• May be used for commercial purposes

• May be used for private purposes

• May not be used for patent purposes

• May be modified, although:

  • Modifications must be released under the same license when distributing the package
  • Changes made to the code must be documented

• May be distributed, although:

  • Source code must be made available when the package is distributed
  • A copy of the license and copyright notice must be included with the package.

• Comes with a LIMITATION of liability

• Comes with NO warranty