1.6 KiB
Arduino
This repository contains Arduino sketches and Arduino libraries maintained by the RUG/DTPA group.
Sketches
Blinky
A hello world example used to play along with Git.
Nexus_Omni4WD
Firmware for the Nexus Omni4WD wheel base for setting the wheel speeds independently. It is used to control the robot under ROS. The Omni4WD wheel controller hardware board #10009 with io-expansion shield is based on the Arduino Duemilanove/ATMEGA328. Take care of this when programming the controller.
sketches/Nexus_Omni4WD. This folder contains the Arduino sketch of the firmware. The program works as a simple command interpreter for controlling the wheel speeds independently. To compile, use the libraries provided in the extra/factory_10011.zip archive.
extra/carcomm
testcarcom.py. This is a small Python application to test the Nexus_Omni4WD firmware (sketch). The python application sends data packages to set the wheel speeds.
extra/nexuscontrol. Script to control the Nexus via a ROS-node.
RoFish
A CPG-based locomotion control example of a robotic fish.
adaptiveFreqOsc
An adaptive frequency oscillator example with Arduino.
varDutyT1
A sketch for varying (modulating) the duty-cycle of the PWM on the UNO-output pins 9 and 10 via the analog A0 input. The PWM frequency and update rate(!) = 15.625kHz. Resolution is 10-bits.
Libraries
Currently there are no libraries available.