reset working

test/unit_tests/chip_nomap/test.act

@@ -0,0 +1,102 @@
+/*************************************************************************
+ *
+ *  This file is part of ACT dataflow neuro library.
+ * It's the testing facility for cell_lib_std.act
+ *
+ *  Copyright (c) 2022 University of Groningen - Ole Richter  
+ *  Copyright (c) 2022 University of Groningen - Hugh Greatorex
+ *  Copyright (c) 2022 University of Groningen - Michele Mastella
+ *  Copyright (c) 2022 University of Groningen - Madison Cotteret
+ *
+ *  This source describes Open Hardware and is licensed under the CERN-OHL-W v2 or later
+ *
+ *  You may redistribute and modify this documentation and make products
+ *  using it under the terms of the CERN-OHL-W v2 (https:/cern.ch/cern-ohl).
+ *  This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED
+ *  WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY
+ *  AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN-OHL-W v2
+ *  for applicable conditions.
+ *
+ *  Source location: https://git.web.rug.nl/bics/actlib_dataflow_neuro
+ *
+ *  As per CERN-OHL-W v2 section 4.1, should You produce hardware based on
+ *  these sources, You must maintain the Source Location visible in its
+ *  documentation.
+ *
+ **************************************************************************
+ */
+
+import "../../dataflow_neuro/coders.act";
+import "../../dataflow_neuro/primitives.act";
+import "../../dataflow_neuro/chips.act";
+
+import globals;
+import std::data;
+
+open std::data;
+
+
+open tmpl::dataflow_neuro;
+
+defproc chip_texel_test (bd<14> in; bd<14> out; Mx1of2<8> reg_data[16];
+    bool? bd_dly_cfg[4], loopback_en){
+
+    bool _reset_B; 
+    prs {
+        Reset => _reset_B-
+    }
+    power supply;
+    supply.vdd = Vdd;
+    supply.vss = GND;
+
+    pint N_IN = 14;
+    
+    pint N_NRN_X = 2;
+    pint N_NRN_Y = 4;
+    // pint NC_NRN_X = std:ceil_log2(N_NRN_X);
+    // pint NC_NRN_Y = std:ceil_log2(N_NRN_Y);
+    pint NC_NRN_X = 1;
+    pint NC_NRN_Y = 2;
+
+    pint N_SYN_X = 2;
+    pint N_SYN_Y = 4;
+    // pint NC_SYN_X = std:ceil_log2(N_SYN_X);
+    // pint NC_SYN_Y = std:ceil_log2(N_SYN_Y);
+    pint NC_SYN_X = 1;
+    pint NC_SYN_Y = 2;
+
+    pint N_SYN_DLY_CFG = 4;
+    pint N_BD_DLY_CFG = 4;
+
+    pint N_NRN_MON_X = 2;
+    pint N_NRN_MON_Y = 4;
+    pint N_SYN_MON_X = 2;
+    pint N_SYN_MON_Y = 4;
+
+    pint N_BUFFERS = 3;
+
+    pint N_LINE_PD_DLY = 3;
+    
+    pint REG_NCA = 4;
+    pint REG_M = 1<<REG_NCA;
+    pint REG_NCW = 8;
+
+    chip_texel<N_IN,
+    N_NRN_X, N_NRN_Y, N_SYN_X, N_SYN_Y,
+    NC_NRN_X, NC_NRN_Y, NC_SYN_X, NC_SYN_Y,
+    N_SYN_DLY_CFG,
+    N_NRN_MON_X, N_NRN_MON_Y, N_SYN_MON_X, N_SYN_MON_Y,
+    N_BUFFERS,
+    N_LINE_PD_DLY,
+    N_BD_DLY_CFG,
+    REG_NCA, REG_NCW, REG_M> c(.in = in, .out = out, .reg_data = reg_data,
+        .bd_dly_cfg = bd_dly_cfg, .loopback_en = loopback_en,
+        .reset_B = _reset_B, .supply = supply);
+
+    c.synapses = c.neurons; // Connect each synapse hs to a neuron hs
+
+}
+
+
+// fifo_decoder_neurons_encoder_fifo e;
+chip_texel_test c; 

test/unit_tests/chip_nomap/test.prsim

@@ -0,0 +1,22 @@
+watchall
+
+
+# set-bool-array "c.bd_dly_cfg" 4 15
+set c.bd_dly_cfg[0] 1
+set c.bd_dly_cfg[1] 1
+set c.bd_dly_cfg[2] 1
+set c.bd_dly_cfg[3] 1
+
+set-bd-channel-neutral "c.in" 14
+set-bd-channel-neutral "c.out" 14
+set c.loopback_en 1
+set Reset 1
+
+cycle
+
+mode run
+system "echo '[] Set reset 0'"
+status X
+set Reset 0
+cycle
+