cleaned up coders a bit

dataflow_neuro/coders.act

@@ -116,17 +116,8 @@ namespace tmpl {
 	A_2C_B_X1 C2el(.c1 = vtree_x.out, .c2 = vtree_y.out, .vdd = supply.vdd, .vss = supply.vss);
 	addr_buf.out.v = C2el.y;
 
-			// delayprog<N_dly_cfg> dly(.in = tielow.y, .s = dly_cfg, .supply = supply);
 	delayprog<N_dly_cfg> dly(.in = C2el.y, .s = dly_cfg, .supply = supply);
-			
-			// ACK MAY HAVE BEEN DISCONNECTED HERE
-			// FOR TESTING PURPOSES
-			// !!!!!!!!!!!!!!!!
 	dly.out = addr_buf.out.a;
-			// ACK MAY HAVE BEEN DISCONNECTED HERE
-			// FOR TESTING PURPOSES
-			// !!!!!!!!!!!!!!!!
-
 
 	// Decoder X/Y And trees
 	decoder_dualrail<NxC,Nx> d_dr_x(.out = outx, .supply = supply);
@@ -161,7 +152,7 @@ namespace tmpl {
  *  N_dly is a hard coded delay of the pull down circuit.
  * 	It can be set to 0.
  */
-		export template<pint NxC, NyC, Nx, Ny, N_dly>
+export template<pint NxC, NyC, Nx, Ny>
 defproc decoder_2d_hs (avMx1of2<NxC+NyC> in; a1of1 out[Nx*Ny]; bool? reset_B; power supply) {
 
 	// Buffer to recieve concat(x,y) address packet
@@ -190,89 +181,52 @@ namespace tmpl {
 
 	// Acknowledge pull down time
 
-			// Pull DOWNs on the reqB lines by synapses (easier to invert).
-			bool _out_reqsB[Nx], _out_acksB[Nx]; // The vertical output ack lines from each syn.
-			PULLDOWN2_X4 req_pulldowns[Nx*Ny];
+	// Pull DOWNs on the ackB lines by synapses (easier to invert).
+	bool _out_acksB[Nx]; // The vertical output ack lines from each syn.
+	PULLDOWN2_X4 ack_pulldowns[Nx*Ny];
 	pint index;
 	(i:Nx:
 		(j:Ny:
 			index = i + Nx*j;
-					req_pulldowns[index].a = out[index].a;
-					req_pulldowns[index].b = _out_acksB[i];
-					req_pulldowns[index].y = _out_reqsB[i];
-					req_pulldowns[index].vss = supply.vss;
-					req_pulldowns[index].vdd = supply.vdd;
+			ack_pulldowns[index].a = out[index].a;
+			ack_pulldowns[index].b = d_dr_x.out[i];
+			ack_pulldowns[index].y = _out_acksB[i];
+			ack_pulldowns[index].vss = supply.vss;
+			ack_pulldowns[index].vdd = supply.vdd;
 		)
 	)
 
-			// ReqB keep cells
-			KEEP_X1 req_keeps[Nx];
-			(i:Nx:
-				req_keeps[i].y = _out_reqsB[i];
-				req_keeps[i].vdd = supply.vdd;
-				req_keeps[i].vss = supply.vss;
-			)
-
-			// req-ack buffers
-			// Delay needed here, since otherwise the pull up of reqB happens too quickly.
-			// Means that the pull up may start fighting the synapse, 
-			// since the synapse has not yet retracted its ack.
-			// Also there is the possibility, if really fast, that the line pull up block
-			// doesn't yet see that the input is valid, and starts pulling up.
-			// In any case, this delay is important.
-			sigbuf<Ny> req_bufs[Nx];
-			delay_chain<N_dly> ack_delays[Nx];
-			(i:Nx:
-				ack_delays[i].in = _out_reqsB[i];
-				ack_delays[i].supply = supply;
-
-				// req_bufs[i].in = _out_reqsB[i];
-				req_bufs[i].in = ack_delays[i].out;
-				req_bufs[i].out[0] = _out_acksB[i]; // DANGER DANGER
-				req_bufs[i].supply = supply;
-
-
-
-			)
-
-			// Line end pull UPs (triggered once synapse reqs removed)
-			OR2_X1 pu_ORs[Nx];
+	// Line end pull UPs (triggered once reqs removed)
 	PULLUP_X4 pu[Nx]; // TODO probably replace this with variable strength PU
 	AND2_X1 pu_ANDs[Nx];
 	(i:Nx:
-				pu_ORs[i].a = _out_acksB[i];
-				pu_ORs[i].b = d_dr_x.out[i];
-				pu_ORs[i].vdd = supply.vdd;
-				pu_ORs[i].vss = supply.vss;
-
-				pu_ANDs[i].a = pu_ORs[i].y;
+		pu_ANDs[i].a = d_dr_x.out[i];
 		pu_ANDs[i].b = reset_B; // TODO buffer
 		pu_ANDs[i].vdd = supply.vdd;
 		pu_ANDs[i].vss = supply.vss;
 
 		pu[i].a = pu_ANDs[i].y;
-				pu[i].y = _out_reqsB[i];
+		pu[i].y = _out_acksB[i];
 		pu[i].vdd = supply.vdd;
 		pu[i].vss = supply.vss;
 	)
 
-			// ORtree from all output reqs, back to the buffer ack.
+	// ORtree from all output acks, back to the buffer ack.
 	// This is instead of the ack that came from the delayed validity trees,
 	// in decoder_2d_dly.
 	ortree<Nx>  _ortree(.out = addr_buf.out.a, .supply = supply);
-			INV_X1 out_req_invs[Nx];
+	INV_X1 out_ack_invs[Nx];
 	(i:Nx:
-				out_req_invs[i].a = _out_reqsB[i];
-				out_req_invs[i].vdd = supply.vdd;
-				out_req_invs[i].vss = supply.vss;
+		out_ack_invs[i].a = _out_acksB[i];
+		out_ack_invs[i].vdd = supply.vdd;
+		out_ack_invs[i].vss = supply.vss;
 
-				_ortree.in[i] = out_req_invs[i].y;
+		_ortree.in[i] = out_ack_invs[i].y;
 	)
 }
 
 
 
-
 /*
  * Build an arbiter_handshake tree.
  */