* Function `mo_failures` to review values that could not be coerced to a valid MO code, using `as.mo`. This latter function will now only show a maximum of 25 uncoerced values.
* Function `age_groups` to split ages into custom or predefined groups (like children or elderly). This allows for easier demographic antimicrobial resistance analysis per age group.
* Functions `filter_first_isolate` and `filter_first_weighted_isolate()` to shorten and fasten filtering on data sets with antimicrobial results, e.g.:
* Will now use a column named like "patid" for the patient ID (parameter `col_patientid`), when this parameter was left blank
* Will now use a column named like "key(...)ab" or "key(...)antibiotics" for the key antibiotics (parameter `col_keyantibiotics`), when this parameter was left blank
* A note to the manual pages of the `portion` functions, that low counts can influence the outcome and that the `portion` functions may camouflage this, since they only return the portion (albeit being dependent on the `minimum` parameter)
* Function `count_all` to get all available isolates (that like all `portion_*` and `count_*` functions also supports `summarise` and `group_by`), the old `n_rsi` is now an alias of `count_all`
* Function `get_locale` to determine language for language-dependent output for some `mo_*` functions. This is now the default value for their `language` parameter, by which the system language will be used at default.
* Data sets `microorganismsDT`, `microorganisms.prevDT`, `microorganisms.unprevDT` and `microorganisms.oldDT` to improve the speed of `as.mo`. They are for reference only, since they are primarily for internal use of `as.mo`.
* Now also applies rules from the EUCAST 'Breakpoint tables for bacteria', version 8.1, 2018, http://www.eucast.org/clinical_breakpoints/ (see Source of the function)
* New parameter `rules` to specify which rules should be applied (expert rules, breakpoints, others or all)
* New parameter `verbose` which can be set to `TRUE` to get very specific messages about which columns and rows were affected
* Better error handling when rules cannot be applied (i.e. new values could not be inserted)
* Added parameter `combine_IR` (TRUE/FALSE) to functions `portion_df` and `count_df`, to indicate that all values of I and R must be merged into one, so the output only consists of S vs. IR (susceptible vs. non-susceptible)
* Added parameter `also_single_tested` for `portion_*` and `count_*` functions to also include cases where not all antibiotics were tested but at least one of the tested antibiotics includes the target antimicribial interpretation, see `?portion`
* Removed diacritics from all authors (columns `microorganisms$ref` and `microorganisms.old$ref`) to comply with CRAN policy to only allow ASCII characters
* The data set `microorganisms` now contains **all microbial taxonomic data from ITIS** (kingdoms Bacteria, Fungi and Protozoa), the Integrated Taxonomy Information System, available via https://itis.gov. The data set now contains more than 18,000 microorganisms with all known bacteria, fungi and protozoa according ITIS with genus, species, subspecies, family, order, class, phylum and subkingdom. The new data set `microorganisms.old` contains all previously known taxonomic names from those kingdoms.
* Extra function `count_df` (which works like `portion_df`) to get all counts of S, I and R of a data set with antibiotic columns, with support for grouped variables
* Function `is.rsi.eligible` to check for columns that have valid antimicrobial results, but do not have the `rsi` class yet. Transform the columns of your raw data with: `data %>% mutate_if(is.rsi.eligible, as.rsi)`
* Functions `as.mo` and `is.mo` as replacements for `as.bactid` and `is.bactid` (since the `microoganisms` data set not only contains bacteria). These last two functions are deprecated and will be removed in a future release. The `as.mo` function determines microbial IDs using Artificial Intelligence (AI):
* Functions `as.atc` and `is.atc` to transform/look up antibiotic ATC codes as defined by the WHO. The existing function `guess_atc` is now an alias of `as.atc`.
* Edited `ggplot_rsi` and `geom_rsi` so they can cope with `count_df`. The new `fun` parameter has value `portion_df` at default, but can be set to `count_df`.
* **BREAKING**: `rsi_df` was removed in favour of new functions `portion_R`, `portion_IR`, `portion_I`, `portion_SI` and `portion_S` to selectively calculate resistance or susceptibility. These functions are 20 to 30 times faster than the old `rsi` function. The old function still works, but is deprecated.
* **BREAKING**: the methodology for determining first weighted isolates was changed. The antibiotics that are compared between isolates (call *key antibiotics*) to include more first isolates (afterwards called first *weighted* isolates) are now as follows:
* New functions `as.bactid` and `is.bactid` to transform/ look up microbial ID's.
* The existing function `guess_bactid` is now an alias of `as.bactid`
* New Becker classification for *Staphylococcus* to categorise them into Coagulase Negative *Staphylococci* (CoNS) and Coagulase Positve *Staphylococci* (CoPS)
* New Lancefield classification for *Streptococcus* to categorise them into Lancefield groups
* For convience, new descriptive statistical functions `kurtosis` and `skewness` that are lacking in base R - they are generic functions and have support for vectors, data.frames and matrices
* Support for Addins menu in RStudio to quickly insert `%in%` or `%like%` (and give them keyboard shortcuts), or to view the datasets that come with this package
* Function `p.symbol` to transform p values to their related symbols: `0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1`
* Functions `clipboard_import` and `clipboard_export` as helper functions to quickly copy and paste from/to software like Excel and SPSS. These functions use the `clipr` package, but are a little altered to also support headless Linux servers (so you can use it in RStudio Server)
* Column names for the `key_antibiotics` function are now generic: 6 for broadspectrum ABs, 6 for Gram-positive specific and 6 for Gram-negative specific ABs
* Frequency tables are now actual `data.frame`s with altered console printing to make it look like a frequency table. Because of this, the parameter `toConsole` is not longer needed.
* Added `"groups"` option for `atc_property(..., property)`. It will return a vector of the ATC hierarchy as defined by the [WHO](https://www.whocc.no/atc/structure_and_principles/). The new function `atc_groups` is a convenient wrapper around this.
* Build-in host check for `atc_property` as it requires the host set by `url` to be responsive
* Improved `first_isolate` algorithm to exclude isolates where bacteria ID or genus is unavailable
* Fix for warning *hybrid evaluation forced for row_number* ([`924b62`](https://github.com/tidyverse/dplyr/commit/924b62)) from the `dplyr` package v0.7.5 and above
* Function `guess_bactid` to **determine the ID** of a microorganism based on genus/species or known abbreviations like MRSA
* Function `guess_atc` to **determine the ATC** of an antibiotic based on name, trade name, or known abbreviations
* Function `freq` to create **frequency tables**, with additional info in a header
* Function `MDRO` to **determine Multi Drug Resistant Organisms (MDRO)** with support for country-specific guidelines.
* Suggest your own via [https://github.com/msberends/AMR/issues/new](https://github.com/msberends/AMR/issues/new?title=New%20guideline%20for%20MDRO&body=%3C--%20Please%20add%20your%20country%20code,%20guideline%20name,%20version%20and%20source%20below%20and%20remove%20this%20line--%3E)
* [Exceptional resistances defined by EUCAST](http://www.eucast.org/expert_rules_and_intrinsic_resistance) are also supported instead of countries alone
* Functions `BRMO` and `MRGN` are wrappers for Dutch and German guidelines, respectively
